MY series: Rờ le kiếng
Công ty Tự Động Hóa VIETFA chuyên cung cấp tất cả các loại rờ le kiếng dòng MY của hãng Omron.
+84-964 654 007 
Description
• Ngoài loại tiêu chuẩn MY, Omron còn có một loạt sản phẩmphong phú bao gồm: rơ le chốt giữ trạng thái hoạt động tiếp điểm (MYK) . Và rơ le chống bụi, phù hợp cho môi trường có khí ăn mòn (MYQ / MYH)
Specification
Operating Coils
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and inductance values are reference values only (at 60 Hz).3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum.To ensure operation, apply at least 80% of the rated value (at a coil temperature of 23°C).*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC.To ensure release, use a value that is lower than the specified value.
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and inductance values are reference values only (at 60 Hz).3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum.To ensure operation, apply at least 80% of the rated value.*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC.To ensure release, use a value that is lower than the specified value.
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and inductance values are reference values only (at 60 Hz).3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum.To ensure operation, apply at least 80% of the rated value.*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC.To ensure release, use a value that is lower than the specified value.
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and inductance values are reference values only (at 60 Hz).3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum.To ensure operation, apply at least 80% of the rated value.*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To ensurerelease, use a value that is lower than the specified value.Contact Ratings
*1.If you use a Socket, do not exceed the rated carry current of the Socket.*2.Values shown in parentheses are for the MY[](S) model with latching lever.Characteristics
Note: The data shown above are initial values.*1.Models with latching lever are 100 mΩ maximum.*2.Measurement conditions: 1 A at 5 VDC using the voltage drop method.*3.Measurement conditions: With rated operating power applied, not including contact bounce.*4.Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.*5.Ambient temperature condition: 23°C*6.This value was measured at a switching frequency of 120 operations per minute.
*1.With no icing or condensation.*2.This limitation is due to the diode junction temperature and elements used.Certified StandardsUL certification (File No. E41515)
CSA certification (File No. LR31928)
TÜV Rheinland certification (Certification No. R50030059)
CE Marking
LR certification (Lloyd’s Register)
VDE certification
MYK Miniature Power Latching RelaysRatingsOperating coil (AC)
Note: 1. The rated current for AC is the value measured with a DC ammeter in half-wave rectification.2. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.3. The AC coil resistance is a reference value only.4. Operating characteristics were measured at a coil temperature of 23°C.5. The maximum voltage capacity was measured at an ambient temperature of 23°C.*There is variation between products, but actual values are 80% maximum.Contact Ratings
Characteristics
Note: The data shown above are initial values.*1.Measurement conditions: 1 A at 5 VDC using the voltage drop method.*2.Measurement conditions: With rated operating power applied, not including contact bounce.*3.Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.*4.Ambient temperature condition: 23°C*5.This value was measured at a switching frequency of 120 operations per minute.*6.With no icing or condensation.MYQ/MYH Miniature Power Sealed RelaysOperating coil (AC)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and coil inductance values are for reference only.3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum. To ensure operation, apply at least 80% ofthe rated value.*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To ensurerelease, use a value that is lower than the specified value.Contact RatingsPlastic Sealed Relays: MYQ
Hermetically Sealed Relays: MYH
Characteristics
Note: The data shown above are initial values.*1.Measurement conditions:1 A at 5 VDC using the voltage drop method.*2.Measurement conditions:With rated operating power applied, not including contact bounce.Ambient temperature condition:23°C*3.Measurement conditions:For 500 VDC applied to the same location as for dielectric strength measurement.*4.Ambient temperature condition:23°C*5.This value was measured at a switching frequency of 120 operations per minute.*6.With no icing or condensation.Common Options (Order Separately)CharacteristicsSocketsPlease click image to enlarge (open in a new window).Socket AccessoriesFor Front-connecting SocketsShort Bars
*Scheduled to be discontinued in March 2021.Certified StandardsCSA certification (File No. LR031928)
* When power is supplied to all four poles, use with a total power current that does not exceed 20 A.UL certification (File No. E87929)
* When power is supplied to all four poles, use with a total power current that does not exceed 20 A.TÜV Rheinland certification
*Ratings are for an ambient temperature of 55°C or below. At an ambient temperature of 70°C, the value is 7 A.VDE certification
| Terminal Type | Classification | Numberof poles | Contacts | Without operationindicator | With operationindicator | ||||||||
| Plug-in terminals | Standard models | 2 | Single | MY2 | MY2N | ||||||||
| 4 | Single | MY4 | MY4N | ||||||||||
| Bifurcated | MY4Z | MY4ZN | |||||||||||
| Models with built-in diode forcoil surge absorption(DC coil specification only) | 2 | Single | MY2-D | MY2N-D2 | |||||||||
| 4 | Single | MY4-D | MY4N-D2 | ||||||||||
| Bifurcated | MY4Z-D | MY4ZN-D2 | |||||||||||
| Models with built-in CR circuitfor coil surge absorption(AC coil specification only) | 2 | Single | MY2-CR | MY2N-CR | |||||||||
| 4 | Single | MY4-CR | MY4N-CR | ||||||||||
| Bifurcated | MY4Z-CR | MY4ZN-CR | |||||||||||
| Item | Rated current(mA) | Coilresistance(Ω) | Coil inductance (H) | Mustoperatevoltage(V) | Mustreleasevoltage(V) | Maximumvoltage(V) | Powerconsumption(VA, W) | ||||||
| Rated voltage(V) | 50 Hz | 60 Hz | ArmatureOFF | ArmatureON | |||||||||
| AC | 12 | 106.5 | 91 | 46 | 0.17 | 0.33 | 80%max.*1 | 30%min.*2 | 110% ofratedvoltage | Approx. 0.9to 1.3(at 60 Hz) | |||
| 24 | 53.8 | 46 | 180 | 0.69 | 1.3 | ||||||||
| 100/110 | 11.7/12.9 | 10/11 | 3,750 | 14.54 | 24.6 | ||||||||
| 110/120 | 9.9/10.8 | 8.4/9.2 | 4,430 | 19.2 | 32.1 | ||||||||
| 200/220 | 6.2/6.8 | 5.3/5.8 | 12,950 | 54.75 | 94.07 | ||||||||
| 220/240 | 4.8/5.3 | 4.2/4.6 | 18,790 | 83.5 | 136.4 | ||||||||
| DC | 12 | 72.7 | 165 | 0.73 | 1.37 | 10%min.*2 | Approx. 0.9 | ||||||
| 24 | 36.3 | 662 | 3.2 | 5.72 | |||||||||
| 48 | 17.6 | 2,725 | 10.6 | 21.0 | |||||||||
| 100/110 | 8.7/9.6 | 11,440 | 45.6 | 86.2 | |||||||||
| Terminal Type | Classification | Numberof poles | Contacts | Without operationindicator | With operationindicator | ||||||||
| Plug-in terminals | Standard models | 2 | Bifurcated | MY2Z | MY2ZN | ||||||||
| Models with built-in diode forcoil surge absorption(DC coil specification only) | 2 | Bifurcated | MY2Z-D | MY2ZN-D2 | |||||||||
| 3 | Single | MY3-D | MY3N-D2 | ||||||||||
| Models with built-in CR circuitfor coil surge absorption(AC coil specification only) | 2 | Bifurcated | MY2Z-CR | MY2ZN-CR | |||||||||
| Item | Rated current(mA) | Coilresistance(Ω) | Coil inductance (H) | Mustoperatevoltage(V) | Mustreleasevoltage(V) | Maximumvoltage(V) | Powerconsumption(VA, W) | ||||||
| Rated voltage(V) | 50 Hz | 60 Hz | ArmatureOFF | ArmatureON | |||||||||
| AC | 12 | 106.5 | 91 | 46 | 0.17 | 0.33 | 80%max.*1 | 30%min.*2 | 110% ofratedvoltage | Approx. 0.9to 1.3(at 60 Hz) | |||
| 24 | 53.8 | 46 | 180 | 0.69 | 1.3 | ||||||||
| 100/110 | 11.7/12.9 | 10/11 | 3,750 | 14.54 | 24.6 | ||||||||
| 110/120 | 9.9/10.8 | 8.4/9.2 | 4,430 | 19.2 | 32.1 | ||||||||
| 200/220 | 6.2/6.8 | 5.3/5.8 | 12,950 | 54.75 | 94.07 | ||||||||
| 220/240 | 4.8/5.3 | 4.2/4.6 | 18,790 | 83.5 | 136.4 | ||||||||
| DC | 12 | 75 | 160 | 0.73 | 1.37 | 10%min.*2 | Approx. 0.9 | ||||||
| 24 | 36.9 | 650 | 3.2 | 5.72 | |||||||||
| 48 | 18.5 | 2,600 | 10.6 | 21.0 | |||||||||
| 100/110 | 9.1/10 | 11,000 | 45.6 | 86.2 | |||||||||
| Terminal Type | Classification | Number of poles | Contacts | With latching lever | ||||||||||
| Plug-in terminals | Standard models | 2 | Single | MY2IN(S) | ||||||||||
| 4 | Single | MY4IN(S) | ||||||||||||
| Bifurcated | MY4ZIN(S) | |||||||||||||
| Models with built-in diode forcoil surge absorption(DC coil specification only) | 2 | Single | MY2IN-D2(S) | |||||||||||
| 4 | Single | MY4IN-D2(S) | ||||||||||||
| Bifurcated | MY4ZIN-D2(S) | |||||||||||||
| Models with built-in CR circuitfor coil surge absorption(AC coil specification only) | 2 | Single | MY4IN-CR(S) | |||||||||||
| 4 | Bifurcated | MY4ZIN-CR(S) | ||||||||||||
| Item | Rated current(mA) | Coilresistance(Ω) | Coil inductance (H) | Mustoperatevoltage(V) | Mustreleasevoltage(V) | Maximumvoltage(V) | Powerconsumption(VA, W) | |||||||
| Rated voltage(V) | 50 Hz | 60 Hz | ArmatureOFF | ArmatureON | ||||||||||
| AC | 100/110 | 11.7/12.9 | 10/11 | 3,750 | 14.54 | 24.6 | 80%max.*1 | 30%min.*2 | 110% ofratedvoltage | Approx. 0.9to 1.3(at 60 Hz) | ||||
| 200/220 | 6.2/6.8 | 5.3/5.8 | 12,950 | 54.75 | 94.07 | |||||||||
| DC | 12 | 75 | 160 | 0.73 | 1.37 | 10%min.*2 | Approx. 0.9 | |||||||
| 24 | 37.7 | 636 | 3.2 | 5.72 | ||||||||||
| 48 | 18.8 | 2,560 | 10.6 | 21 | ||||||||||
| Terminal Type | Classification | Numberof poles | Contacts | Without operationindicator | With operationindicator | ||||||||
| Plug-in terminals | Standard models | 3 | Single | MY3 | MY3N | ||||||||
| 4 | Crossbar bifurcated | MY4Z-CBG | MY4ZN-CBG | ||||||||||
| PCB terminals | Standard models | 2 | Single | MY2-02 | — | ||||||||
| 3 | Single | MY3-02 | — | ||||||||||
| 4 | Single | MY4-02 | — | ||||||||||
| Bifurcated | MY4Z-02 | — | |||||||||||
| Case-surfacemounting | Standard models | 2 | Single | MY2F | — | ||||||||
| 3 | Single | MY3F | — | ||||||||||
| 4 | Single | MY4F | — | ||||||||||
| Bifurcated | MY4ZF | — | |||||||||||
| Item | Rated current(mA) | Coilresistance(Ω) | Coil inductance (H) | Mustoperatevoltage(V) | Mustreleasevoltage(V) | Maximumvoltage(V) | Powerconsumption(VA, W) | ||||||
| Rated voltage(V) | 50 Hz | 60 Hz | ArmatureOFF | ArmatureON | |||||||||
| AC | 12 | 106.5 | 91 | 46 | 0.17 | 0.33 | 80%max.*1 | 30%min.*2 | 110% ofratedvoltage | Approx. 0.9to 1.3(at 60 Hz) | |||
| 24 | 53.8 | 46 | 180 | 0.69 | 1.3 | ||||||||
| 100/110 | 11.7/12.9 | 10/11 | 3,750 | 14.54 | 24.6 | ||||||||
| 110/120 | 9.9/10.8 | 8.4/9.2 | 4,430 | 19.2 | 32.1 | ||||||||
| 200/220 | 6.2/6.8 | 5.3/5.8 | 12,950 | 54.75 | 94.07 | ||||||||
| 220/240 | 4.8/5.3 | 4.2/4.6 | 18,790 | 83.5 | 136.4 | ||||||||
| DC | 12 | 75 | 160 | 0.73 | 1.37 | 10%min.*2 | Approx. 0.9 | ||||||
| 24 | 36.9 | 650 | 3.2 | 5.72 | |||||||||
| 48 | 18.5 | 2,600 | 10.6 | 21.0 | |||||||||
| 100/110 | 9.1/10 | 11,000 | 45.6 | 86.2 | |||||||||
| Number ofpoles(contactconfiguration) | 2-pole (DPDT) | 3-pole (3PDT) | ||||||||||
| Contactstructure | Single | Bifurcated | Single | |||||||||
| With latching lever (S) | ||||||||||||
| Load | Resistiveload | Inductiveload(cos φ = 0.4,L/R = 7 ms) | Resistiveload | Inductiveload(cos φ = 0.4,L/R = 7 ms) | Resistiveload | Inductiveload(cos φ = 0.4,L/R = 7 ms) | Resistiveload | Inductiveload(cos φ = 0.4,L/R = 7 ms) | ||||
| Rated load | 5 A at220 VAC5 A at24 VDC | 2 A at220 VAC2 A at24 VDC | 5 A at250 VAC5 A at30 VDC | 2 A at250 VAC2 A at30 VDC | 5 A at220 VAC5 A at24 VDC | 2 A at220 VAC2 A at24 VDC | 5 A at220 VAC5 A at24 VDC | 2 A at220 VAC2 A at24 VDC | ||||
| Rated carrycurrent*1 | 5 A (10 A*2) | 5 A | 5 A | |||||||||
| Maximumswitchingvoltage | 250 VAC, 125 VDC | 250 VAC, 125 VDC | ||||||||||
| Maximumswitchingcurrent | 5 A | 10 A | 5 A | 5 A | ||||||||
| Maximumswitchingpower | 1,100 VA120 W | 440 VA48 W | 2,500 VA300 W | 500 VA60 W | 1,100 VA120 W | 440 VA48 W | 1,100 VA120 W | 440 VA48 W | ||||
| Contactmaterial | Ag | Au plating + Ag | Ag | |||||||||
| Number of poles (contact configuration) | 4-pole (4PDT) | |||||||||||
| Contact structure | Single | |||||||||||
| With latching lever (S) | ||||||||||||
| Load | Resistive load | Inductive load(cos φ = 0.4,L/R = 7 ms) | Resistive load | Inductive load(cos φ = 0.4,L/R = 7 ms) | ||||||||
| Rated load | 3 A at 220 VAC3 A at 24 VDC | 0.8 A at 220 VAC1.5 A at 24 VDC | 3 A at 250 VAC3 A at 30 VDC | 0.8 A at 250 VAC1.5 A at 30 VDC | ||||||||
| Rated carry current*1 | 3 A (5 A*2) | |||||||||||
| Maximum switching voltage | 250 VAC, 125 VDC | |||||||||||
| Maximum switching current | 3 A | |||||||||||
| Maximum switching power | 660 VA72 W | 176 VA36 W | 1,250 VA150 W | 200 VA45 W | ||||||||
| Contact material | Au cladding + Ag alloy | |||||||||||
| Number of poles(contact configuration) | 4-pole (4PDT) | |||||
| Contact structure | Bifurcated | Crossbar bifurcated (CBG) | ||||
| With latching lever (S) | ||||||
| Load | Resistiveload | Inductive load(cos φ = 0.4,L/R = 7 ms) | Resistiveload | Inductive load(cos φ = 0.4,L/R = 7 ms) | Resistiveload | Inductive load(cos φ = 0.4,L/R = 7 ms) |
| Rated load | 3 A at220 VAC3 A at24 VDC | 0.8 A at220 VAC1.5 A at24 VDC | 3 A at250 VAC3 A at30 VDC | 0.8 A at250 VAC1.5 A at30 VDC | 1 A at220 VAC1 A at24 VDC | 0.3 A at220 VAC0.5 A at24 VDC |
| Rated carry current*1 | 3 A (5 A*2) | 1 A | ||||
| Maximum switchingvoltage | 250 VAC, 125 VDC | |||||
| Maximum switchingcurrent | 3 A | 1 A | ||||
| Maximum switchingpower | 660 VA72 W | 176 VA36 W | 1,250 VA150 W | 200 VA45 W | 220 VA24 W | 66 VA12 W |
| Contact material | Au cladding + Ag alloy | Au cladding + AgPd | ||||
| Number of poles (contact configuration) | 2-pole (DPDT) | 3-pole (3PDT) | ||
| Contact structure | Single | Bifurcated | Single | |
| Contact resistance*1 *2 | 50 mΩ max. | |||
| Operate time*3 | 20 ms max. | |||
| Release time*3 | 20 ms max. | |||
| Maximumswitchingfrequency | Mechanical | 18,000 operations/h | ||
| Rated load | 1,800 operations/h | |||
| Insulation resistance*4 | 100 MΩ min. | |||
| Dielectricstrength | Between coil and contacts | 2,000 VAC, 50/60 Hz for 1 min | ||
| Between contacts ofdifferent polarity | ||||
| Between contacts ofthe same polarity | 1,000 VAC at 50/60 Hz for 1 min | |||
| Vibrationresistance | Destruction | 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude) | ||
| Malfunction | 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude) | |||
| Shockresistance | Destruction | 1,000 m/s2 | ||
| Malfunction | 200 m/s2 | |||
| Endurance | Mechanical | AC: 50,000,000operations min.DC: 100,000,000operations min.(switching frequency:18,000 operations/h) | AC: 50,000,000operations min.DC: 50,000,000operations min.(switching frequency:18,000 operations/h) | AC: 50,000,000operations min.DC: 100,000,000operations min.(switching frequency:18,000 operations/h) |
| Electrical*5 | 500,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h) | 200,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h) | 500,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h) | |
| Failure rate P value (reference value)*6 | 1 mA at 5 VDC | 100 μA at 1 VDC | 1 mA at 5 VDC | |
| Weight | Approx. 35 g | Approx. 35 g | Approx. 35 g | |
| Number of poles (contact configuration) | 4-pole (4PDT) | |||
| Contact structure | Single | Bifurcated | Crossbar bifurcated(CBG) | |
| Contact resistance*1 *2 | 50 mΩ max. | 100 mΩ max. | ||
| Operate time*3 | 20 ms max. | |||
| Release time*3 | 20 ms max. | |||
| Maximumswitchingfrequency | Mechanical | 18,000 operations/h | ||
| Rated load | 1,800 operations/h | |||
| Insulation resistance*4 | 100 MΩ min. | |||
| Dielectricstrength | Between coil and contacts | 2,000 VAC, 50/60 Hz for 1 min | ||
| Between contacts ofdifferent polarity | ||||
| Between contacts ofthe same polarity | 1,000 VAC at 50/60 Hz for 1 min | 700 VAC at 50/60 Hzfor 1 min | ||
| Vibrationresistance | Destruction | 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude) | ||
| Malfunction | 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude) | |||
| Shockresistance | Destruction | 1,000 m/s2 | ||
| Malfunction | 200 m/s2 | |||
| Endurance | Mechanical | AC: 50,000,000operations min.DC: 100,000,000operations min.(switching frequency:18,000 operations/h) | AC: 20,000,000operations min.DC: 20,000,000operations min.(switching frequency:18,000 operations/h) | AC: 50,000,000operations min.DC: 50,000,000operations min.(switching frequency:18,000 operations/h) |
| Electrical*5 | 200,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h) | 100,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h) | 50,000 operations min.(rated load, switchingfrequency: 1,800operations/h) | |
| Failure rate P value (reference value)*6 | 1 mA at 1 VDC | 100 μA at 1 VDC | 100 μA at 1 VDC | |
| Weight | Approx. 35 g | Approx. 35 g | Approx. 35 g | |
| Classification | Standard models | Models with built-in diode for coilsurge absorption (-D)/ Models withbuilt-in CR circuit for coil surgeabsorption (-CR) | ||||||
| Contacts | Single/bifurcated | Crossbar/bifurcated(CBG) | Single/bifurcated | |||||
| Features | Withoutoperationindicator | With operation indicator | Withoutoperationindicator | Withoperationindicator | Withoutoperationindicator | With operation indicator | ||
| Withlatchinglever | Withlatchinglever | |||||||
| Ambientoperatingtemperature*1 | -55 to70°C | -55 to 60°C*2 | -55 to 70°C | -25 to70°C | -25 to60°C | -55 to60°C *2 | -55 to 60°C*2 | -55 to 70°C |
| Ambientoperatinghumidity | 5% to 85% | 5% to 85% | ||||||
| Model | Standardnumber | Category | Listed/Recognized | OperatingCoil ratings | No. ofpoles | Contact ratings | Certifiednumber ofoperations |
| MY2MY2NMY2IN(S)MY2N-D2MY2-D2MY2IN-D2(S)MY2-CRMY2N-CR | UL508 | NRNT2 | Recognition | 6 to 240 VAC6 to 125 VDC | 2 | 10 A, 250 VAC (General Use)10 A, 30 VDC (General Use)7 A, 240 VAC (General Use)7 A, 24 VDC (Resistive)5 A, 240 VAC (General Use)5 A, 250 VAC (Resistive)5 A, 30 VDC (Resistive)3 A, 265 VAC (Resistive) | 6,000 |
| 1/6 HP, 250 VAC1/8 HP, 265 VAC1/10 HP, 120 VAC | 1,000 | ||||||
| B300 Pilot Duty(Same polarity) | 6,000 | ||||||
| MY2ZMY2ZNMY2-02MY2FMY2Z-DMY2Z-D2MY2Z-CRMY2ZN-CR | UL508 | NRNT2 | Recognition | 6 to 240 VAC6 to 125 VDC | 2 | 7 A, 240 VAC (General Use)7 A, 24 VDC (Resistive)5 A, 240 VAC (General Use)5 A, 250 VAC (Resistive)5 A, 30 VDC (Resistive)3 A, 265 VAC (Resistive) | 6,000 |
| 1/6 HP, 250 VAC1/8 HP, 265 VAC1/10 HP, 120 VAC | 1,000 | ||||||
| B300 Pilot Duty(Same polarity) | 6,000 | ||||||
| MY3MY3NMY3-DMY3N-D2MY3-02MY3F | UL508 | NRNT2 | Recognition | 6 to 240 VAC6 to 125 VDC | 3 | 5 A, 28 VDC (Resistive)5 A, 240 VAC (General Use) | 6,000 |
| 1/6 HP, 250 VAC | 1,000 | ||||||
| MY4MY4NMY4IN(S)MY4-DMY4N-D2MY4IN-D2(S)MY4ZMY4ZNMY4ZIN(S)MY4Z-DMY4ZN-D2MY4ZIN-D2(S)MY4Z-CRMY4ZN-CRMY4ZIN-CR(S)MY4-02MY4FMY4Z-02MY4ZF | UL508 | NRNT2 | Recognition | 6 to 240 VAC6 to 125 VDC | 4 | 5 A, 28 VDC (General Use)(Same polarity)5 A, 240 VAC (General Use)(Same polarity)5 A, 30 VDC (Resistive)(Same polarity)5 A, 250 VAC (Resistive)(Same polarity)0.2 A, 120 VDC (Resistive)(Same polarity) | 6,000 |
| 1/6 HP, 250 VAC(Same polarity)1/10 HP, 120 VAC(Same polarity) | 1,000 | ||||||
| B300 Pilot Duty(Same polarity) | 6,000 |
| Model | Standardnumber | Classnumber | OperatingCoil ratings | No. ofpoles | Contact ratings | Certifiednumber ofoperations |
| MY2MY2NMY2IN(S)MY2N-D2MY2-D2MY2IN-D2(S)MY2-CRMY2N-CR | C22.2 NO.0,No.14 | 6 to 240 VAC6 to 125 VDC | 2 | 7 A, 240 VAC (Resistive)7 A, 24 VDC (Resistive)5 A, 240 VAC (General Use)5 A, 250 VAC (Resistive)5 A, 30 VDC (Resistive) | 6,000 | |
| 1/6 HP, 250 VAC (Same polarity)1/10 HP, 120 VAC (Same polarity) | 1,000 | |||||
| MY2ZMY2ZNMY2-02MY2FMY2Z-DMY2Z-D2MY2Z-CRMY2ZN-CR | C22.2 NO.0,No.14 | 6 to 240 VAC6 to 125 VDC | 2 | 7 A, 240 VAC (General Use)(Same polarity)7 A, 24 VDC (Resistive)(Same polarity)5 A, 240 VAC (General Use)(Same polarity)5 A, 30 VDC (Resistive)5 A, 250 VAC (Resistive)(Same polarity)0.2 A, 120 VDC (Resistive) | 6,000 | |
| 1/6 HP, 250 VAC1/10 HP, 120 VAC | 1,000 | |||||
| MY3MY3NMY3-DMY3N-D2MY3-02MY3F | C22.2 NO.0,No.14 | 6 to 240 VAC6 to 125 VDC | 3 | 5 A, 28 VDC (Resistive)5 A, 240 VAC (General Use)7 A, 240 VAC (General Use)7 A, 24 VDC (Resistive) | 6,000 | |
| 1/6 HP, 250 VAC | 1,000 | |||||
| MY4MY4NMY4N(S)MY4-DMY4N-D2MY4IN-D2(S)MY4-CRMY4N-CRMY4IN-CR(S)MY4ZMY4ZNMY4ZIN(S)MY4Z-DMY4ZN-D2MY4ZIN-D2(S)MY4Z-CMY4ZN-CRMY4ZIN-CR(S) | C22.2 No.14 | 3211 07 | 6 to 240 VAC6 to 125 VDC | 4 | 5 A, 240 VAC (General Use)(Same polarity)5 A, 28 VDC (General Use)(Same polarity)5 A, 250 VAC (Resistive)(Same polarity)5 A, 30 VDC (Resistive)(Same polarity)0.2 A, 120 VDC (Resistive)(Same polarity) | 6,000 |
| 1/6 HP, 250 VAC (Same polarity)1/10 HP, 120 VAC (Same polarity) | 1,000 | |||||
| B300 Pilot Duty (Same polarity) | 6,000 | |||||
| MY4-02MY4FMY4Z-02MY4ZF | C22.2 NO.0,No.14 | 3211 07 | 6 to 240 VAC6 to 125 VDC | 4 | 7 A, 240 VAC (General Use)(Same polarity)7 A, 24 VDC (Resistive)(Same polarity)5 A, 240 VAC (General Use)(Same polarity)5 A, 30 VDC (Resistive)5 A, 250 VAC (Resistive)(Same polarity)0.2 A, 120 VDC (Resistive) | 6,000 |
| 1/6 HP, 250 VAC1/10 HP, 120 VAC | 1,000 |
| Model | Operating Coil ratings | Contact ratings | Certified number of operations |
| MY2ZMY2ZNMY2-02MY2FMY2Z-DMY2Z-D2MY2Z-CRMY2ZN-CR | 6 to 125 VDC,6 to 240 VAC | 5 A, 250 VAC (cos φ = 1.0) | 100,000 |
| MY3MY3NMY3-DMY3N-D2MY3-02MY3F | 5 A, 250 VAC (cos φ = 1.0)0.8 A, 250 VAC (cos φ = 0.4) | ||
| MY4-02MY4FMY4Z-02MY4ZF | 3 A, 120 VAC (cos φ = 1.0)0.8 A, 250 VAC (cos φ = 0.4) |
| Model | EMC Directive | Low Voltage Directive | Machinery Directive | Safety Category |
| MY2MY2NMY2IN(S)MY2ZMY2ZNMY2-DMY2N-D2MY2IN-D2(S)MY2-CRMY2N-CRMY2Z-CRMY2ZN-CRMY2Z-DMY2ZN-D2MY2F | Not applicable | Applicable | Not applicable | 1 |
| MY3MY3NMY3-DMY3N-D2MY3F | ||||
| MY4MY4NMY4IN(S)MY4ZMY4ZNMY4ZIN(S)MY4-DMY4N-D2MY4IN-D2(S)MY4Z-DMY4ZN-D2MY4ZIN-D2(S)MY4-CRMY4N-CRMY4Z-CRMY4ZN-CRMY4FMY4ZF |
| Model | File No. | EnvironmentalCategory | OperatingCoil ratings | Contact ratings | Certified numberof operations |
| MY2MY2NMY2IN(S)MY2-DMY2N-D2MY2IN-D2(S)MY2-CRMY2N-CR | File No.98/10014 | ENV2,3 | 6 to 240 VAC6 to 125 VDC | 10 A, 250 VAC (Resistive)2 A, 250 VAC (PF0.4)10 A, 30 VDC (Resistive)2 A, 30 VDC (L/R = 7 ms) | MY2:50,000 |
| MY2ZMY2ZNMY2Z-DMY2ZN-D2 | File No.90/10270 | ENV2,3 | 6 to 240 VAC6 to 125 VDC | 2 A, 30 VDC inductive load2 A, 200 VAC inductive load | MY2:50,000 |
| MY4MY4NMY4IN(S)MY4-DMY4N-D2MY4IN-D2(S)MY4-CRMY4N-CRMY4IN-CR(S)MY4ZMY4ZNMY4ZIN(S)MY4Z-DMY4ZN-D2MY4ZIN-D2(S)MY4Z-CRMY4ZN-CRMY4ZIN-CR(S) | File No.98/10014 | ENV2,3 | 6 to 240 VAC6 to 125 VDC | 5 A, 250 VAC (Resistive)0.8 A, 250 VAC (PF0.4)5 A, 30 VDC (Resistive)1.5 A, 30 VDC (L/R = 7 ms) | MY4:50,000 |
| Model | Standardnumber | Certification No. | OperatingCoil ratings | Contact ratings | Certified numberof operations |
| MY2MY2NMY2IN(S)MY2-DMY2N-D2MY2IN-D2(S)MY2-CRMY2N-CR | EN 61810-1 | 112467UG | 6, 12, 24,48/50,100/110,110/120,200/220,220/240 VAC6, 12, 24,48, 100/110,125 VDC | 10A, 250 VAC (cos φ = 1)10A, 30 VDC (L/R = 0 ms) | MY2:100,000MY4:100,000MY4Z:50,000 (AC) |
| MY4MY4NMY4IN(S)MY4ZMY4ZNMY4ZIN(S)MY4-DMY4ZN-D2MY4IN-D2(S)MY4Z-DMY4Z-D2MY4ZIN-D2(S)MY4-CRMY4N-CRMY4IN-CR(S)MY4Z-CRMY4ZN-CRMY4ZIN-CR(S) | 6, 12, 24,48/50,100/110,110/120,200/220,220/240 VAC6, 12, 24,48, 100/110,125 VDC | 5 A, 250 VAC (cos φ = 1)5 A, 30 VDC (L/R = 0 ms) |
| Ratedvoltage(V) | Set coil | Reset coil | Mustoperatevoltage(V) | Mustreleasevoltage(V) | Maximumvoltage(V) | Power consumption(VA, W) | ||||||
| Rated current(mA) | Coilresistance(Ω) | Rated current(mA) | Coilresistance(Ω) | Set coil | Reset coil | |||||||
| 50 Hz | 60 Hz | 50 Hz | 60 Hz | |||||||||
| AC | 12 | 57 | 56 | 72 | 39 | 38.2 | 130 | 80%max.* | 80%max. | 110%max. ofratedvoltage | Approx.0.6 to0.9 (at60 Hz) | Approx.0.2 to0.5 (at60 Hz) |
| 24 | 27.4 | 26.4 | 320 | 18.6 | 18.1 | 550 | ||||||
| 100 | 7.1 | 6.9 | 5,400 | 3.5 | 3.4 | 3,000 | ||||||
| DC | 12 | 110 | 110 | 50 | 235 | Approx.1.3 | Approx.0.6 | |||||
| 24 | 52 | 470 | 25 | 940 | ||||||||
| 48 | 27 | 1,800 | 16 | 3,000 | ||||||||
| Number of poles (contact configuration) | 2-pole (DPDT) | |
| Contact structure | Single | |
| Load | Resistive load | Inductive load (cos φ = 0.4, L/R = 7 ms) |
| Rated load | 3 A at 220 VAC3 A at 24 VDC | 0.8 A at 220 VAC1.5 A at 24 VDC |
| Rated carry current | 3 A | |
| Maximum switching voltage | 250 VAC, 125 VDC | |
| Maximum switching current | 3 A | |
| Maximum switching power | 660 VA72 W | 176 VA36 W |
| Contact material | Au plating + Ag | |
| Contact resistance*1 | 50 mΩ max. | |
| Set | Operate time*2 | AC: 30 ms max., DC: 15 ms max. |
| Minimum pulse width | AC: 60 ms, DC: 30 ms | |
| Reset | Release time*2 | AC: 30 ms max., DC: 15 ms max. |
| Minimum pulse width | AC: 60 ms, DC: 30 ms | |
| Maximumswitchingfrequency | Mechanical | 18,000 operations/h |
| Rated load | 1,800 operations/h | |
| Insulation resistance*3 | 100 MΩ min. | |
| Dielectricstrength | Between coil and contactsBetween contacts ofdifferent polarity | 1,500 VAC at 50/60 Hz for 1 min |
| Between contacts of thesame polarity | 1,000 VAC at 50/60 Hz for 1 min | |
| Between set/reset coils | ||
| Vibrationresistance | Destruction | 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude) |
| Malfunction | 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude) | |
| Shockresistance | Destruction | 1,000 m/s2 |
| Malfunction | 200 m/s2 | |
| Endurance | Mechanical | 100,000,000 operations min. (switching frequency: 18,000 operations/h) |
| Electrical*4 | 200,000 operations min. (at rated load, switching frequency: 1,800operations/h) | |
| Failure rate P value (reference value)*5 | 1 mA at 1 VDC | |
| Ambient operating temperature*6 | -55 to 60°C | |
| Ambient operating humidity | 5% to 85% | |
| Weight | Approx. 30 g | |
| Ratedvoltage(V) | Rated current(mA) | Coilresistance(Ω) | Coil inductance (H) | Mustoperatevoltage(V)*1 | Mustreleasevoltage(V)*2 | Maximumvoltage(V) | Powerconsumption(VA, W) | |||
| 50 Hz | 60 Hz | ArmatureOFF | ArmatureON | |||||||
| AC | 24 | 53.8 | 46 | 180 | 0.69 | 1.3 | 80%max. | 30%min. | 110%max. ofratedvoltage | Approx. 0.9to 1.3(at 60 Hz) |
| 100/110 | 11.7/12.9 | 10/11 | 3,750 | 14.54 | 24.6 | |||||
| 110/120 | 9.9/10.8 | 8.4/9.2 | 4,430 | 19.2 | 32.1 | |||||
| 200/220 | 6.2/6.8 | 5.3/5.8 | 12,950 | 54.75 | 91.07 | |||||
| 220/240 | 4.8/5.3 | 4.2/4.6 | 18,790 | 83.5 | 136.4 | |||||
| DC | 12 | 75 | 165 | 0.734 | 1.37 | 10%min. | Approx. 0.9 | |||
| 24 | 36.9 | 650 | 3.2 | 5.72 | ||||||
| 48 | 18.5 | 2,600 | 10.6 | 21.0 | ||||||
| 100/110 | 9.1/10 | 11,000 | 45.6 | 86.0 | ||||||
| Number of poles (contact configuration) | 4-pole (4PDT) | |
| Contact structure | Single/bifurcated | |
| Load | Resistive load | Inductive load (cos φ = 0.4, L/R = 7 ms) |
| Rated load | 1 A at 220 VAC1 A at 24 VDC | 0.5 A at 220 VAC0.5 A at 24 VDC |
| Rated carry current | 1 A | |
| Maximum switching voltage | 250 VAC125 VDC | |
| Maximum switching current | 1 A | |
| Maximum switching power | 220 VA24 W | 110 VA12 W |
| Contact material | Au plating + Ag | |
| Number of poles(contact configuration) | 4-pole (4PDT) | |||
| Contact structure | Single | Bifurcated | ||
| Load | Resistive load | Inductive load(cos φ = 0.4,L/R = 7 ms) | Resistive load | Inductive load(cos φ = 0.4,L/R = 7 ms) |
| Rated load | 3 A at 110 VAC3 A at 24 VDC | 0.8 A at 110 VAC1.5 A at 24 VDC | 3 A at 110 VAC3 A at 24 VDC | 0.8 A at 110 VAC1.5 A at 24 VDC |
| Rated carry current | 3 A | |||
| Maximum switching voltage | 125 VAC125 VDC | |||
| Maximum switching current | 3 A | |||
| Maximum switching power | 330 VA72 W | 88 VA36 W | 330 VA72 W | 88 VA36 W |
| Contact material | Au plating + Ag | |||
| Model | MYQ | MYH | |
| Contact resistance*1 | 50 mΩ max. | ||
| Operate time*2 | 20 ms max. | ||
| Release time*2 | 20 ms max. | ||
| Maximumswitchingfrequency | Mechanical | 18,000 operations/h | |
| Rated load | 1,800 operations/h | ||
| Insulation resistance*3 | 100 MΩ min. | ||
| Dielectricstrength | Between coil andcontacts | 1,500 VAC at 50/60 Hz for 1 min | 1,000 VAC at 50/60 Hz for 1 min |
| Between contactsof different polarity | 1,500 VAC at 50/60 Hz for 1 min | 1,000 VAC at 50/60 Hz for 1 min | |
| Between contactsof the same polarity | 1,000 VAC at 50/60 Hz for 1 min | 700 VAC at 50/60 Hz for 1 min | |
| Vibrationresistance | Destruction | 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude) | |
| Malfunction | 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude) | ||
| Shockresistance | Destruction | 1,000 m/s2 | |
| Malfunction | 200 m/s2 | ||
| Endurance | Mechanical | Single contacts:AC: 50,000,000 operations min.,DC: 100,000,000 operations min.Bifurcated contacts:5,000,000 operations min.,DC: 5,000,000 operations min.(switching frequency: 18,000operations/h) | Single contacts:50,000,000 operations min.Bifurcated contacts:5,000,000 operations min.(switching frequency: 18,000operations/h) |
| Electrical*4 | Single contacts:200,000 operations min.Bifurcated contacts:100,000 operations min.(at rated load, switching frequency:1,800 operations/h) | Single contacts:100,000 operations min.Bifurcated contacts:50,000 operations min.(at rated load, switching frequency:1,800 operations/h) | |
| Failure rate P Level (referencevalue)*5 | Single contacts: 1 mA at 1 VDCBifurcated contacts: 100 μA at 1 VDC | Single contacts: 100 μA at 1 VDCBifurcated contacts: 100 μA at 100 mVDC | |
| Ambient operating temperature*6 | -55 to 60°C | -25 to 60°C | |
| Ambient operating humidity | 5% to 85% | ||
| Weight | Approx. 35 g | Approx. 50 g | |
| Application | Applicablesockets | Model | Maximumcarry current | Ambient operatingtemperature | Ambient operatinghumidity |
| Bridging contactterminals(common) | PYF-08-PU(-L)PYF-14-PU(-L) | PYDN-7.75-020[] | 20 A | -40 to 70°C | 5% to 85% |
| PYDN-7.75-030[] | |||||
| PYDN-7.75-040[] | |||||
| PYDN-7.75-200[] | |||||
| PYFZ-08PYF08A* | PYD-025B[] | 20 A(However,18 A when 70°C) | -40 to 70°C(with no icing orcondensation) | 45% to 85%(with no icing orcondensation) | |
| PYD-085B[] | |||||
| PYFZ-14PYF14A* | PYD-026B[] | ||||
| PYD-086B[] | |||||
| PYD-020B[] | |||||
| PYD-030B[] | |||||
| For Coil terminals | PYF-08-PU(-L)PYF-14-PU(-L) | PYDN-31.0-080[] | 20 A | -40 to 70°C | 5% to 85% |
| PYF08S | PYDM-08S[] | 10 A | -40 to 70°C | 5% to 85% | |
| PYF14S | PYDM-14S[] | 10 A | -40 to 70°C | 5% to 85% |
| Model | Ratings | Class number | Standard number |
| PYF-08-PU | 10 A, 250 V | 3211 07 | CSA C22.2 No14 |
| PYF-14-PU | 6 A, 250 V* | ||
| PYF08S | 10 A, 250 V | ||
| PYF14S | 5 A, 250 V | ||
| PYFZ-08(-E) | 10 A, 250 V | ||
| PYFZ-14(-E) | 6 A, 250 V | ||
| PY[]PYF[]A(-E) | 7 A, 250 V |
| Model | Ratings | Standard number | Category | Listed/Recognized |
| PYF-08-PU | 10 A, 250 V | UL508 | SWIV2 | Recognition |
| PYF-14-PU | 6 A, 250 V* | |||
| PYF08SPYF14S | 10 A, 250 V | |||
| PYFZ-08(-E) | 10 A, 250 V | |||
| PYFZ-14(-E) | 6 A, 250 V | |||
| PY[]PYF[]A(-E) | 7 A, 250 V |
| Model | Ratings | Standard number | Certification No. |
| PYF-08-PU | 10 A, 250 V* | EN 61984 | R50327595 |
| PYF-14-PU | 6 A, 250 V | ||
| PYFZ-08(-E) | 10 A, 250 V | R50405329 | |
| PYFZ-14(-E) | 6 A, 250 V |
| Model | Standard number | Certification No. |
| PYF08S | VDE0627 (EN61984) | 40015509 |
| PYF14 |
