FX 500 1

FX-500 Ver.2 Panasonic Fiber Sensor – Cảm biến sợi quang

VIETFA cung cấp cảm biến sợi quang dòng FX-500 của Panasonic

Liên hệ:              +84-964 654 007 Category: Maker:        Panasonic
Description

Improved the operability and visibility of the operation keys

Operation keys (setting switch and MODE key) have been renewed to be easy to operate. Also, the color of the keys has been changed from black to light gray to achieve good visibility in dim light.

[Previous]

Previous
pic03

[Upgraded (Ver. 2)]

Upgraded (Ver. 2)
TypeStandard type2-output typeCable type(Analog output type)
ModelNo.NPN outputFX-501FX-502FX-505-C2
PNP outputFX-501PFX-502PFX-505P-C2
Regulatory complianceEMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification
Supply voltage12 to 24 V DC+10-15 % Ripple P-P 10 % or less
Power consumptionNormal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output of cable type)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output of cable type)
Output(2-output type and cable type:Output 1, Output 2)<NPN output type>NPN open-collector transistor• Maximum sink current: 100 mA (2-output type and cable type are 50 mA) (Note 2)• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 2 V or less (Note 3) (at maximum sink current)<PNP output type>PNP open-collector transistor• Maximum source current: 100 mA (2-output type and cable type are 50 mA) (Note 2)• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 2 V or less (Note 3) (at maximum source current)
Output points1 point2 points
Output operationSwitchable either Light-ON or Dark-ON by L/D mode
Short-circuit protectionIncorporated
Response timeH-SP: 25 μs or less, FAST: 60 μs or less, STD: 250 μs or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable
Analog output(Cable type only)Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note 4)], Response time: 2 ms or less, Zero point: Within 4 mA ±1 % F.S., Span: Within 16 mA ±5 % F.S., Linearity: Within ±3 % F.S., Load resistance: 0 to 250 Ω
External input(2-output type only, switchablewith Output 2)-<NPN output type>NPN non-contact input• Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +1.2 V DC(at 0.5 mA source current)• Input impedance: 10 kΩ approx.<PNP output type>PNP non-contact input• Signal conditionHigh: +4 V to +V DC (at 3 mA sink current)Low: 0 to +0.6 V DC or Open• Input impedance: 10 kΩ approx.
Possible externalinput function-Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable
Sensitivity setting2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incident lightintensity display rangeH-SP / FAST / STD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999
Timer functionIncorporated with variable OFF-delay / ON-delay /One-shot / ON OFF-delay / ON-delay • One-shot timer, switchable either effective or ineffective<Output 1>Incorporated with variable OFF-delay / ON-delay /One-shot / ON OFF-delay / ON-delay • One-shot timer, switchable either effective or ineffective
<Output 2>Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective
Timer periodTimer range "ms": 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.,Timer range "sec.": 0.5 s approx., 1 to 32 s approx., 1 s approx.,Timer range "1/10 ms": 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx., each output is set individually
Light emittingamount selectionfunctionIncorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]
Interferenceprevention functionIncorporated (Note 5), selectable either automatic interference prevention or different frequency
Various settingsHysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold tracking setting, etc.
ProtectionIP40 (IEC)
Ambienttemperature-10 to +55 ℃ +14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units (cable type: 8 to 12 units) are mounted in cascade: -10 to +45 ℃ +14 to +113 ℉](No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting element(modulated)Red LED (Peak emission wavelength: 643 nm 0.025 mil)
MaterialEnclosure, Case cover: Polycarbonate, Switch: Polyacetal
Cable-0.2 mm2 6-core cabtyre cable,2 m 6.562 ft long
Cable extension-Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.(however, supply voltage 12 V DC)
WeightNet weight: 15 g approx., Gross weight: 70 g approx.Net weight: 60 g approx.,Gross weight: 100 g approx.
AccessoryFX-MB1 (Amplifier protection seal): 1 set

Notes:

1)Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
3)In case of using the quick-connection cable (cable length 5 m 16.404 ft) (optional).
4)If display adjustment was conducted, it is not in this range.
5)Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.

Number of sensor heads mountable closely (Unit: set)

■Thru-beam type(one pair set)

TypeModelNo.Sensing range(mm) (Note1)
HYPRU-LGLONGSTDFASTH-SP
Square headM3FT-R311,00058044027016055
M4FT-R433,0001,6001,100720430130
FT-R41W3,2001,8001,400800460150
FT-R42W3,600 (Note2)3,600 (Note2)3,5002,2001,300460
FT-R44Y3,0001,6001,100720430130
M6FT-R60Y3,600 (Note2)3,600 (Note2)3,600 (Note2)2,1001,260400
Note1:Note that sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
Note2:The fiber cable length practically limits the sensing range.

■Reflective type

TypeModelNo.Sensing range(mm) (Note1) (Note2)
HYPRU-LGLONGSTDFASTH-SP
Square headM3FD-R31G5303102601708527
FD-R32EG1701109245309
FD-R34EG130907038237
FD-R33EG84443319113
M4FD-R4171043032021010034
M6FD-R61Y99061043528016050
Note1:Note that sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
Note2:The sensing range is specified for white non-glossy paper.

For details of Square Head Fiber, refer to product information page.>>Go to "Square Head Fiber"

Return to top

Super Quality

■Thru-beam type (one pair set)

TypeModel No.Sensing range (mm)
HYPRU-LGLONGSTDFASTH-SP
ThreadedM3FT-301,35081065040021075
M4FT-403,600 (Note)2,2001,7001,200530190
Cylindricalφ1.5FT-S201,35081065040021075
φ3FT-S303,600 (Note)2,2001,7001,200530190
Note:The fiber cable length practically limits the sensing range.

■Reflective type

TypeModel No.Sensing range (mm) (Note)
HYPRU-LGLONGSTDFASTH-SP
ThreadedM3FD-306003302501608025
M4FD-406003302501608025
M6FD-601,55090074052026090
Cylindricalφ3FD-S306003302501608025
Note:The sensing range is specified for white non-glossy paper.

For details of Super Quality Fiber, refer to product information page.>>Go to "Super Quality Fiber"

Return to top

Threaded Type

■Thru-beam type (one pair set)

TypeModel No.Sensing range (mm) (Note 1)
HYPRU-LGLONGSTDFASTH-SP
ThreadedM3FT-311,35077055031521070
FT-31W99059044026015053
FT-323,600(Note 2)3,600(Note 2)3,600(Note 2)3,0001,600580
M4FT-433,600(Note 2)2,8002,1001,400770240
FT-423,600(Note 2)2,0501,6001,130530190
FT-42W3,3001,9001,400800490160
FT-45X1,600(Note 2)1,600(Note 2)1,600(Note 2)1,200630200
ElbowFT-R403,600(Note 2)1,7501,500930500160
M14Long rangeFT-14019,600(Note 2)19,600(Note 2)19,600(Note 2)19,600(Note 2)16,0006,300
Note 1:Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
Note 2:The fiber cable length practically limits the sensing range.

■Reflective type

TypeModel No.Sensing range (mm) (Note 1, 2)
HYPRU-LGLONGSTDFASTH-SP
ThreadedM3FD-315152902201258025
FD-31W330180140804512
FD-32G6503802702009527
FD-32GX63041036020010030
FD-34G330185135904915
Ultra-small diameterFD-EG3017013011048309
FD-EG3185453520123.5
M4FD-415152902201258025
FD-41W90063043027015045
FD-42G6503802702009527
FD-42GW6703402801509025
M6FD-621,5001,000940520340110
FD-611,40084067045020070
FD-61W90063043027015045
FD-61G1,10080065042020060
FD-64X67050041028016050
ElbowFD-R601,10060055029019065
Note 1:Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
Note 2:The sensing range is specified for white non-glossy paper.

For details of Threaded Type Fiber, refer to product information page.>>Go to "Threaded Type Fiber"

Return to top

Cylindrical Type

■Thru-beam type (one pair set)

TypeModel No.Sensing range (mm) (Note 1)
HYPRU-LGLONGSTDFASTH-SP
Cylindricalφ1FT-S11350210160906019
φ1.5FT-S211,35077055031521070
FT-S21W99059044026015053
FT-S221,50092073045025090
φ2.5FT-S323,600 (Note 2)3,600 (Note 2)3,600 (Note 2)3,1001,800600
φ3FT-S31W3,3001,9001,400800490160
Ultra-small diameterφ3FT-E135230241582
FT-E23270160125754213
Side-viewφ4FT-V403,600 (Note 2)3,600 (Note 2)3,600 (Note 2)3,5002,400850
Note 1:Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
Note 2:The fiber cable length practically limits the sensing range.

■Reflective type

TypeModel No.Sensing range (mm) (Note 1, 2)
HYPRU-LGLONGSTDFASTH-SP
Cylindricalφ1.5FD-S21190130110803711
φ3FD-S32120079066042022075
FD-S32W90063043027015045
FD-S315152902201258025
FD-S33GW6703402801509025
FD-S34G330185135904915
Ultra-small diameterφ1.5FD-E135029251272
φ3FD-E231701208055309
Note 1:Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
Note 2:The sensing range is specified for white non-glossy paper.

For details of Cylindrical Type Fiber, refer to product information page.>>Go to "Cylindrical Type Fiber"

Return to top

Sleeve

■Thru-beam type (one pair set)

TypeModel No.Sensing range (mm) (Note 1, 2)
HYPRU-LGLONGSTDFASTH-SP
ThreadedM3FT-31S1,22074055031519563
M4FT-42S3,600 (Note 2)2,0501,6001,130530190
CylindricalUltra-small diameterφ3FT-E135230241582
FT-E23270160125754213
Side-viewφ2FT-V231,8001,00088045028090
FT-V2590055048024014045
FT-V24W3802302001106020
φ2.5FT-V302,2001,2001,000680340100
Note 1:Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
Note 2:The fiber cable length practically limits the sensing range.

■Reflective type

TypeModel No.Sensing range (mm) (Note 1, 2)
HYPRU-LGLONGSTDFASTH-SP
ThreadedUltra-small diameterM3FD-EG30S1701108050309
M4FD-41S5152902201258025
FD-41SW330180140804512
M6FD-61S1,20079066042022075
CylindricalUltra-small diameterφ1.5FD-E135029251272
φ3FD-E231701208055309
Side-viewφ3FD-V30240130120653514
FD-V30W80403020102
φ5FD-V503702202101207525
Note 1:Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
Note 2:The sensing range is specified for white non-glossy paper.