Ống khí nén Pisco Nylon tube NA/NB: Soft Nylon tube
Công Ty Tự Động Hóa VIETFA phân phối dòng ống dẫn khí nén Pisco NA , NB series
Ống khí nén Pisco Nylon tube NA/NB: dạng ống dẫn khí nylon mềm
●Fine Pressure, Wear, and Cold Resistance
●NB Tube for Hot Water and Thermal Oil.
●Excellent Bending Fatigue Resistance. Stably Usable for Long Time.
●12 Color Selections for NB Tube. 9 Color Selections for NA Tube
●Longer Length Tube is available. (Make-to-Order)
Fluid medium | Air, Water (Conditional *1), Thermal oil (Conditional *1) |
---|---|
Max. operation pressure (65%RH at 20º) | 1.5MPa (*2) |
Max. vacuum | -100kPa |
Operating temperature range | -15~90ºC (No freezing) |
Durometer (reference only) | shore D 65 |
Warning
*1) Adhere to the following conditions in case the fluid is water or thermal oil
Surge pressure must be controlled lower than max. operating pressure when using water or thermal oil as a fluid medium
Tap water in Japan, which is soft water (low mineral content) can be used. Carry out the evaluation under an actual operating condition for using other kind of water
Be sure to place Insert Ring into the tubing edge when the tubing is inserted into Push-in Fitting with water or thermal oil as a fluid medium
*2) The value of max. operating pressure is measured at 20ºC at 65%RH. When the tubing is used in different conditions, consider a safety ratio of the pressure with an enough margin, referring to Burst Pressure Curve
- Ống phi 6*4
- Ốngphi 8*6
- Ống phi 10*7.5
- Ống phi 12*9