Cảm biến áp suất Panasonic DP-100 Ver.2 Pressure Sensor
Liên hệ: 
+84-964 654 007 Danh mục: Cảm biến đo Từ khóa: Panasonic DP-100, Panasonic DP-100 Ver.2 Maker: Panasonic
+84-964 654 007 Danh mục: Cảm biến đo Từ khóa: Panasonic DP-100, Panasonic DP-100 Ver.2 Maker: Panasonic
DataSheet Mô tả
Cảm biến áp suất Panasonic DP-100 Ver.2 có độ chính xác cao và đáng tin cậy với đa chức năng (chỉ báo hoạt động đầu ra điện áp tương tự). ‘Giá trị hiện tại’ và ‘giá trị ngưỡng’ có thể được kiểm tra cùng lúc để cải thiện tính dễ vận hành và kiểm tra trực quan. Màn hình 12 đoạn rõ ràng giúp việc này trở nên dễ dàng. Với chức năng sao chép độc đáo, thời gian làm việc và lỗi của con người được giảm thiểu. Có thể thực hiện nhiều loại ứng dụng khác nhau nhờ ba chế độ đầu ra và một loạt các mô-đun cho phép đo áp suất từ -1 đến +10 bar.
Mới: Có sẵn loại đầu nối M8.
Đặc điểm:
- Độ phân giải cao và độ lặp lại
- Các loại áp suất thấp và cao
- Màn hình 3 màu kép (đỏ, lục, cam); công nghiệp đầu tiên đầu ra tương tự
- Giá trị hiện tại và ngưỡng trong một chế độ xem
- Chức năng sao chép; tiêu chuẩn toàn cầu mới
- Ba chế độ hoạt động, cài đặt dễ dàng
- Được trang bị chế độ ECO
- Dễ dàng cài đặt
Loại đầu nối M8
High resolution pressure sensor with dual 3-colour display
Highly accurate and reliable pressure sensor with multifunction (analogue voltage output operation indicator). ‘Current value’ and ‘threshold value’ can be checked at the same time to improve ease of operation and visual checking. A clear 12-segment display makes this easy. With the unique copy function, man-hours and human errors are reduced. Various types of applications can be realised thanks to three output modes and a wide range of modules allowing pressure from -1 to +10 bars to be measured.
New: M8 connector type available.
Characteristics:
- High resolution and repeatability
- Low and high pressure types
- Dual 3-colour display (red, green, orange); industry first
- Analogue output
- Current and threshold value in one view
- Copy function; new global standard
- Three operation modes, easy setting
- Equipped with an ECO mode
- Easy installation
- M8 connector type
Accessories:
- Connector
- Connector attached cable 1, 3, 5m
- Sensor mounting bracket
- Panel mounting bracket
- Front protection cover
Specification
| Type | Standard | Multi-function | |||
|---|---|---|---|---|---|
| For low pressure | For high pressure | For low pressure | For high pressure | ||
| Model No. | Asia(Note 2) | DP-101(-M)(-P) | DP-102(-M)(-P) | DP-101A(-M)(-P) | DP-102A(-M)(-P) |
| Europe | DP-101-E-P | DP-102-E-P | DP-101A-E-P | DP-102A-E-P | |
| M8 plug-in connector type | DP-111-E-P-J | DP-112-E-P-J | DP-111A-E-P-J | DP-112A-E-P-J | |
| North America(Note 2) | DP-101-N(-P) | DP-102-N(-P) | DP-101A-N(-P) | DP-102A-N(-P) | |
| CE marking directive compliance | EMC Directive, RoHS Directive | ||||
| Type of pressure | Gauge pressure | ||||
| Rated pressure range | -100.0 to +100.0 kPa | -0.100 to +1.000 MPa | -100.0 to +100.0 kPa | -0.100 to +1.000 MPa | |
| Set pressure range | -101.0 to +101.0 kPa-1.030 to +1.030 kgf/cm2-1.010 to +1.010 bar-14.64 to +14.64 psi-757 to +757 mmHg-29.8 to 29.8 inHg | -0.101 to +1.010 MPa-101 to +1,010 kPa-1.03 to +10.30 kgf/cm2-1.01 to +10.10 bar-14.6 to +146.4 psi | -101.0 to +101.0 kPa-1.030 to +1.030 kgf/cm2-1.010 to +1.010 bar-14.64 to +14.64 psi-757 to +757 mmHg-29.8 to 29.8 inHg | -0.101 to +1.010 MPa-101 to +1,010 kPa-1.03 to +10.30 kgf/cm2-1.01 to +10.10 bar-14.6 to +146.4 psi | |
| Pressure withstandability | 500 kPa | 1.5 MPa | 500 kPa | 1.5 MPa | |
| Applicable fluid | Non-corrosive gas | ||||
| Selectable unit | For low pressure: kPa, kgf/cm2, bar, psi, mmHg, inHg, For high pressure: MPa, kPa, kgf/cm2, bar, psi | ||||
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less | ||||
| Power consumption | Normal operation:720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode:480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage) | ||||
| Comparative output[Comparative output 1,Comparative output 2(Note 3)] | <Asia (NPN output), North America (NPN output)>NPN open-collector transistor• Maximum sink current: 100 mA• Applied voltage: 30 V DC or less (between comparative output and 0 V)• Residual voltage: 2 V or less (at 100 mA sink current)<Asia (PNP output), Europe, North America (PNP output)>PNP open-collector transistor• Maximum source current: 100 mA• Applied voltage: 30 V DC or less (between comparative output and +V)• Residual voltage: 2 V or less (at 100 mA source current) | ||||
| Output operation / Output modes | NO / NC (selectable by key operation) / EASY mode / Hysteresis mode / Window comparator mode | ||||
| Hysteresis | Minimum 1 digit (variable) (however, 2 digits when using psi unit) | ||||
| Repeatability | ±0.1 % F.S.(within ±2 digits) | ±0.2 % F.S.(within ±2 digits) | ±0.1 % F.S.(within ±2 digits) | ±0.2 % F.S.(within ±2 digits) | |
| Response time | 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation | ||||
| Short-circuit protection | Incorporated | ||||
| External input(Note 4)Auto-reference function /Remote zero-adjustment function | - | <Asia (NPN output), North America (NPN output)>ON voltage: 0.4 V DC or lessOFF voltage: 5 to 30 V DC, or openInput impedance: 10 kΩ approx.Input time: 1 ms or more<Asia (PNP output), Europe, North America (PNP output)>ON voltage: 5 V to +V DCOFF voltage: 0.6 V DC or less, or openInput impedance: 10 kΩ approx.Input time: 1 ms or more | |||
| Analog voltage output(Note 4) | - | Output voltage: 1 to 5 V DCZero point: within 3 V ±5 % F.S.Span: within 4 V ±5 % F.S.Linearity: within ±1 % F.S.Output impedance: 1 kΩ approx. | Output voltage: 0.6 to 5 VZero point: within 1 V ±5 % F.S.Span: within 4.4 V ±5 % F.S.Linearity: within ±1 % F.S.Output impedance: 1 kΩ approx. | ||
| Analog current output(Note 4) | - | Output current: 4 to 20 mAZero point: 12 mA ±5 % F.S.Span: 16 mA ±5 % F.S.Linearity: within ±1 % F.S.Load resistance: 250 Ω (max.) | Output current: 2.4 to 20 mAZero point: 4 mA ±5 % F.S.Span: 17.6 mA ±5 % F.S.Linearity: within ±1 % F.S.Load resistance: 250 Ω (max.) | ||
| Display | 4 digits + 4 digits 3-color LCD display(Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) | ||||
| Displayable pressure range | -101.0 to +101.0 kPa-1.030 to +1.030 kgf/cm2-1.010 to +1.010 bar-14.64 to +14.64 psi-757 to +757 mmHg-29.8 to 29.8 inHg | -0.101 to +1.010 MPa-101 to +1,010 kPa-1.03 to +10.30 kgf/cm2-1.01 to +10.10 bar-14.6 to +146.4 psi | -101.0 to +101.0 kPa-1.030 to +1.030 kgf/cm2-1.010 to +1.010 bar-14.64 to +14.64 psi-757 to +757 mmHg-29.8 to 29.8 inHg | -0.101 to +1.010 MPa-101 to +1,010 kPa-1.03 to +10.30 kgf/cm2-1.01 to +10.10 bar-14.6 to +146.4 psi | |
| Indicator | Orange LED(Comparative output 1 operation indicator, comparative output 2 operation indicator: Lights up when each comparative output is ON) | Orange LED(Comparative output 1 operation indicator: Lights up when comparative output is ON, Analog voltage output operation indicator: Lights up when setting) | |||
| Protection | IP40 (IEC) | ||||
| Ambient temperature | -10 to +50 ℃ +14 to +122 ℉, Storage: -10 to +60 ℃ +14 to +140 ℉ | ||||
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed), Storage: 35 to 85 % RH | ||||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||||
| Insulation resistance | 50MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure | ||||
| Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each(when panel is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each) | ||||
| Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each | ||||
| Temperature characteristics | Within ±0.5 % F.S.(at +20 ℃ +68 ℉) | Within ±1 % F.S.(at +20 ℃ +68 ℉) | Within ±0.5 % F.S.(at +20 ℃ +68 ℉) | Within ±1 % F.S.(at +20 ℃ +68 ℉) | |
| Pressure port | Asia: M5 female thread + R (PT) 1/8 male thread [excluding DP-□-M(-P)], Europe: M5 female thread + G 1/8 male thread, North America: M5 female thread + NPT 1/8 male thread | ||||
| Material | Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) , Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber | ||||
| Connecting method / Cable length | Connector / Total length up to 100 m 328.084 ft (less than 30 m 98.425 ft when conforming to CE marking) is possible with 0.3 mm2, or more, cable | ||||
| Weight | Net weight: 40 g approx. (DP-10□-M(-P): 30 g approx.), Gross weight: 130 g approx. (DP-10□-M(-P):120 g approx.) | ||||
| Accessories | CN-14A-C2 (Connector attached cable 2 m 6.562 ft): 1pc. (excluding M8 plug-in connector type) | ||||
Notes:
| 1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
|---|---|
| 2) | Model Nos. of Asia type having "-M" are short pressure port type. Model Nos. of Asia and North America types having the suffix "-P" are PNP output type. |
| 3) | Only standard type is equipped with comparative output 2. |
| 4) | Cannot be used at the same time. |
Model List
Standard pressure port type
| Type | Rated pressure range | Model No. | Pressure port | Comparative output | |||
|---|---|---|---|---|---|---|---|
| Asia | Standard | For low pressure | -100.0 to +100.0kPa | DP-101 | M5 female thread+R 1/8 male thread | NPN open-collector transistor | |
| For high pressure | -0.100 to +1.000MPa | DP-102 | |||||
| Multi-function | For low pressure | -100.0 to +100.0kPa | DP-101A | ||||
| For high pressure | -0.100 to +1.000MPa | DP-102A | |||||
| Europe | Standard | For low pressure | -100.0 to +100.0kPa | DP-101-E-P | M5 female thread+G 1/8male thread | PNP open-collector transistor | |
| For high pressure | -0.100 to +1.000MPa | DP-102-E-P | |||||
| Multi-function | For low pressure | -100.0 to +100.0kPa | DP-101A-E-P | ||||
| For high pressure | -0.100 to +1.000MPa | DP-102A-E-P | |||||
| M8 plug-in connector type | Standard | For low pressure | -100.0 to +100.0kPa | DP-111-E-P-J | M5 female thread+G 1/8male thread | PNP open-collector transistor | |
| For high pressure | -0.100 to +1.000MPa | DP-112-E-P-J | |||||
| Multi-function | For low pressure | -100.0 to +100.0kPa | DP-111A-E-P-J | ||||
| For high pressure | -0.100 to +1.000MPa | DP-112A-E-P-J | |||||
| North America | Standard | For low pressure | -100.0 to +100.0kPa | DP-101-N | M5 female thread+NPT 1/8male thread | NPN open-collector transistor | |
| DP-101-N-P | PNP open-collector transistor | ||||||
| For high pressure | -0.100 to +1.000MPa | DP-102-N | NPN open-collector transistor | ||||
| DP-102-N-P | PNP open-collector transistor | ||||||
| Multi-function | For low pressure | -100.0 to +100.0kPa | DP-101A-N | NPN open-collector transistor | |||
| DP-101A-N-P | PNP open-collector transistor | ||||||
| For high pressure | -0.100 to +1.000MPa | DP-102A-N | NPN open-collector transistor | ||||
| DP-102A-N-P | PNP open-collector transistor | ||||||
Short pressure port type
| Type | Rated pressure range | Model No. | Pressure port | Comparative output | ||
|---|---|---|---|---|---|---|
| Asia | Standard | For low pressure | -100.0 to +100.0kPa | DP-101-M | M5 female thread | NPN open-collector transistor |
| DP-101-M-P | PNP open-collector transistor | |||||
| For high pressure | -0.100 to +1.000MPa | DP-102-M | NPN open-collector transistor | |||
| DP-102-M-P | PNP open-collector transistor | |||||
| Multi-function | For low pressure | -100.0 to +100.0kPa | DP-101A-M | NPN open-collector transistor | ||
| DP-101A-M-P | PNP open-collector transistor | |||||
| For high pressure | -0.100 to +1.000MPa | DP-102A-M | NPN open-collector transistor | |||
| DP-102A-M-P | PNP open-collector transistor | |||||
Type without connector attached cable
Type without connector attached cable CN-14A-C2 is available.When ordering this type, suffix "-J" to the Model No. (Excluding M8 plug-in connector type and short pressure port type)(e.g.) Type without connector attached cable of DP-101-N is "DP-101-N-J"
Accessory
|
