Ống dẫn khí Nitta N5 series Soft Nylon tube
Liên hệ: +84-964 654 007 Danh mục: Ống dẫn khí & Khớp nối Từ khóa: Nitta hose and tubing, Nitta N5, Nitta N5 nylon tubing, Nitta N5-1, Nitta N5-4, Nitta tubing Maker: Nitta
Mô tả
Ống hơi nylon mềm Nitta N5 series Soft Nylon tube
- The most flexible nylon tube.
- Excellent abrasion resistance.
- Has excellent oil and chemical resistance.
- Usable fluid: air, water, general hydraulic oil
- Operating temperature range: (air/general hydraulic oil) -40°C to +100°C, (water) 0°C to +50°C
- Applicable fittings: Push One Series, Quick Seal Series
- Negative pressure performance: -101.294kPa (0.1Torr)
- Standard length: 20M, 100M
- Relationship between operating temperature and maximum operating pressure (right graph)
- The maximum operating pressure varies depending on the operating temperature (ambient temperature). Use outside the allowable range may cause accidents or premature destruction.
- When using at temperatures other than room temperature (20°C), be sure to refer to the maximum operating pressure change rate shown in the graph on the right and use within that value.
Specification
N5 tube (mm size)
part number | Outer diameter (mm) | Inner diameter (mm) | Maximum operating pressure (MPa at 20°C) | Minimum bend radius (mm) | Mass (g/m) | black | red | blue | yellow | green | milky white |
N5-4-4X2 | Four | 2 | 1.8 | Ten | 11 | ● | ● | ● | ● | ● | ● |
N5-4-4X2.5 | Four | 2.5 | 1.2 | 15 | 8 | ● | – | – | – | – | ● |
N5-4-4X3 | Four | 3 | 0.7 | 20 | 6 | ● | ● | ● | ● | ● | ● |
N5-4-6X4 | 6 | Four | 1.1 | 20 | 17 | ● | ● | ● | ● | ● | ● |
N5-4-6X4.5 | 6 | 4.5 | 0.7 | 20 | 13 | ● | ● | ● | ● | ● | ● |
N5-4-8X6 | 8 | 6 | 0.7 | 35 | twenty three | ● | ● | ● | ● | ● | ● |
N5-4-10X7.5 | Ten | 7.5 | 0.7 | 35 | 35 | ● | ● | ● | ● | ● | ● |
N5-4-10X8 | Ten | 8 | 0.6 | 45 | 29 | ● | ● | ● | ● | ● | ● |
N5-4-12X9 | 12 | 9 | 0.7 | 45 | 51 | ● | ● | ● | ● | ● | ● |
N5-4-16X13 | 16 | 13 | 0.6 | 100 | 70 | ● | – | – | – | – | ● |
N5 tube (inch size)
part number | Outer diameter (mm) | Inner diameter (mm) | Maximum operating pressure (MPa at 20°C) | Minimum bend radius (mm) | Mass (g/m) | black | milky white |
N5-1-3/16 | 4.76 | 3.48 | 0.8 | 16 | 9 | ● | ● |
N5-1-1/4 | 6.35 | 4.57 | 0.8 | twenty three | 16 | ● | ● |
N5-1-5/16 | 7.94 | 5.9 | 0.8 | 29 | twenty three | ● | ● |
N5-1-3/8 | 9.53 | 6.99 | 0.8 | 29 | 35 | ● | ● |
N5-1-1/2 | 12.7 | 9.56 | 0.8 | 45 | 58 | ● | ● |
Note: | If water is used as the fluid, it may degrade the tubing depending on the type of additive it contains. Please contact us for details. | |
Note: | When using water as a fluid, keep the surge pressure below the maximum operating pressure. Also, make sure it is not frozen. |
Model List
N5/16 |
N5/16-S |
N5/8 |
N5-1-1/2-BK-100M |
N5-1-1/2-BK-20M |
N5-1-1/2-MW-100M |
N5-1-1/2-MW-20M |
N5-1-1/4-BK-100M |
N5-1-1/4-BK-20M |
N5-1-1/4-MW-100M |
N5-1-1/4-MW-20M |
N5-1-3/16-BK-100M |
N5-1-3/16-BK-20M |
N5-1-3/16-MW-100M |
N5-1-3/16-MW-20M |
N5-1-3/8-BK-100M |
N5-1-3/8-BK-20M |
N5-1-3/8-MW-100M |
N5-1-3/8-MW-20M |
N5-1-5/16-BK-100M |
N5-1-5/16-BK-20M |
N5-1-5/16-MW-100M |
N5-1-5/16-MW-20M |
N5-4-10X7.5-BK-100M |
N5-4-10X7.5-BK-20M |
N5-4-10X7.5-BU-100M |
N5-4-10X7.5-BU-20M |
N5-4-10X7.5-GN-100M |
N5-4-10X7.5-GN-20M |
N5-4-10X7.5-MW-100M |
N5-4-10X7.5-MW-20M |
N5-4-10X7.5-RE-100M |
N5-4-10X7.5-RE-20M |
N5-4-10X7.5-YL-100M |
N5-4-10X7.5-YL-20M |
N5-4-10X8-BK-100M |
N5-4-10X8-BK-20M |
N5-4-10X8-BU-100M |
N5-4-10X8-BU-20M |
N5-4-10X8-GN-100M |
N5-4-10X8-GN-20M |
N5-4-10X8-MW-100M |
N5-4-10X8-MW-20M |
N5-4-10X8-RE-100M |
N5-4-10X8-RE-20M |
N5-4-10X8-YL-100M |
N5-4-10X8-YL-20M |
N5-4-12X9-BK-100M |
N5-4-12X9-BK-20M |
N5-4-12X9-BU-100M |
N5-4-12X9-BU-20M |
N5-4-12X9-GN-100M |
N5-4-12X9-GN-20M |
N5-4-12X9-MW-100M |
N5-4-12X9-MW-20M |
N5-4-12X9-RE-100M |
N5-4-12X9-RE-20M |
N5-4-12X9-YL-100M |
N5-4-12X9-YL-20M |
N5-4-16X13-BK-100M |
N5-4-16X13-BK-20M |
N5-4-16X13-MW-100M |
N5-4-16X13-MW-20M |
N5-4-4X2.5-BK-100M |
N5-4-4X2.5-BK-20M |
N5-4-4X2.5-MW-100M |
N5-4-4X2.5-MW-20M |
N5-4-4X2-BK-100M |
N5-4-4X2-BK-20M |
N5-4-4X2-BU-100M |
N5-4-4X2-BU-20M |
N5-4-4X2-GN-100M |
N5-4-4X2-GN-20M |
N5-4-4X2-MW-100M |
N5-4-4X2-MW-20M |
N5-4-4X2-RE-100M |
N5-4-4X2-RE-20M |
N5-4-4X2-YL-100M |
N5-4-4X2-YL-20M |
N5-4-4X3-BK-100M |
N5-4-4X3-BK-20M |
N5-4-4X3-BU-100M |
N5-4-4X3-BU-20M |
N5-4-4X3-GN-100M |
N5-4-4X3-GN-20M |
N5-4-4X3-MW-100M |
N5-4-4X3-MW-20M |
N5-4-4X3-RE-100M |
N5-4-4X3-RE-20M |
N5-4-4X3-YL-100M |
N5-4-4X3-YL-20M |
N5-4-6X4.5-BK-100M |
N5-4-6X4.5-BK-20M |
N5-4-6X4.5-BU-100M |
N5-4-6X4.5-BU-20M |
N5-4-6X4.5-GN-100M |
N5-4-6X4.5-GN-20M |
N5-4-6X4.5-MW-100M |
N5-4-6X4.5-MW-20M |
N5-4-6X4.5-RE-100M |
N5-4-6X4.5-RE-20M |
N5-4-6X4.5-YL-100M |
N5-4-6X4.5-YL-20M |
N5-4-6X4-BK-100M |
N5-4-6X4-BK-20M |
N5-4-6X4-BU-100M |
N5-4-6X4-BU-20M |
N5-4-6X4-GN-100M |
N5-4-6X4-GN-20M |
N5-4-6X4-MW-100M |
N5-4-6X4-MW-20M |
N5-4-6X4-RE-100M |
N5-4-6X4-RE-20M |
N5-4-6X4-YL-100M |
N5-4-6X4-YL-20M |
N5-4-8X6-BK-100M |
N5-4-8X6-BK-20M |
N5-4-8X6-BU-100M |
N5-4-8X6-BU-20M |
N5-4-8X6-GN-100M |
N5-4-8X6-GN-20M |
N5-4-8X6-MW-100M |
N5-4-8X6-MW-20M |
N5-4-8X6-RE-100M |
N5-4-8X6-RE-20M |
N5-4-8X6-YL-100M |
N5-4-8X6-YL-20M |