Optex FA CD33 Series Small Laser Displacement Sensors
+84-964 654 007 Danh mục: Cảm biến khoảng cách Từ khóa: Displacement Sensors, Optex FA CD33 Series Maker: Mitsubishi
Maker: OPTEX FA
Half-palm size. Ideal for built-in use with smaller machines.
- Specular reflection types have been added to the line up
- Control units for Mitsubishi Electric PLC are available
Specular reflection types
for measurements of specular and transparent objects.
Specular reflection types have been added to the line up to enable the measurement of transparent objects such as glass workpiece, as well as specular objects such as wafers, etc. This means that transparent and specular objects that were diffi cult to measure using diffuse-refl ective types can now be measured with stability.
Thickness measurements also possible
- When using a specular reflection type to measure transparent objects, not only surface displacement, but also thickness can be measured. As shown below, when the laser light is emitted at an angle, light reflected from both the front and rear surfaces of the glass are received by receiver element. Thickness measurements are possible by measuring between the peaks of these reflected light forms.
Diffuse-reflective type Measurement distance based specifications
| Model | CD33-30☐☐☐ | CD33-50☐☐☐ | CD33-85☐☐☐ | CD33-120☐☐☐ | CD33-250☐☐☐ | |
|---|---|---|---|---|---|---|
| Center of measurement range | 30 mm | 50 mm | 85 mm | 120 mm | 250 mm | |
| Measurement range | ±4 mm | ±10 mm | ±20 mm | ±60 mm | ±150 mm | |
| F.S. (full scale) | 8 mm | 20 mm | 40 mm | 120 mm | 300 mm | |
| Light source | Red semiconductor laser, wavelength: 655 nm, Maximum output: 1 mW | |||||
| Laser class | IEC/JIS: CLASS 2 FDA: CLASS II | |||||
| Spot size*1 | 0.1 × 0.1 mm | 0.5 × 1.0 mm | 0.75 × 1.25 mm | 1.0 × 1.5 mm | 1.75 × 3.5 mm | |
| Linearity | ±0.1% F.S. | Linearity ±0.3% F.S. | ||||
| Repeat accuracy | 2 μm(4 μm when responsetime is set to FAST) | 5 μm(8 μm when responsetime is set to FAST) | 10 μm(15 μm when responsetime is set to FAST) | 30 μm(45 μm when responsetime is set to FAST) | 75 μm(100 μm when response time is set to FAST) | |
| Sampling period | 0.5 ms/1 ms/1.5 ms/2 ms | 0.75 ms/1 ms/1.5 ms/2 ms | ||||
| Responsetime*2Averaging | Fast | 5 ms or less: Averaging 1 time (1 ms) +sensitivity switching time (Max. 4 ms) | 7.5 ms or less: Averaging 1 time(1.5 ms) + sensitivity switchingtime (Max. 6 ms) | |||
| Standard | 12.5 ms or less: Averaging 16 times (8.5 ms) +sensitivity switching time (Max. 4 ms) | 19 ms or less: Averaging 16 times(13 ms) + sensitivity switchingtime (Max. 6 ms) | ||||
| Highresolution | 36.5 ms or less: Averaging 64 times (32.5 ms) +sensitivity switching time (Max. 4 ms) | 55 ms or less: Averaging 64 times(49 ms) + sensitivity switchingtime (Max. 6 ms) | ||||
| Temperature drift | ±0.08%/℃ F.S. | |||||
| Indicators | Distance indicator | LED bar display on operation surface (25-step) | ||||
| Output indicator | Q1 and Q2 LED lights up during output (orange) | |||||
| Input indicator | MF LED lights up during input (orange) | |||||
| MF (multi-function) input | Choose from laser OFF, teaching*3, sample & hold Response time: 3 ms or less | |||||
| Connection type | Cable type: Cable length: 2 m (ø5) Connector type: M12, 8-pin | |||||
| Protection circuit | Reverse connection protection, overcurrent protection function | |||||
| Degree of protection | IP67 | |||||
| Ambient temperature/humidity | -10 to +45℃ / 35 to 85% RH (no freezing or condensation) | |||||
| Ambient illuminance | Sunlight: 10,000 lx Incandescent lamp: 3,000 lx | |||||
| Vibration resistance | 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions | |||||
| Shock resistance | Approx. 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions | |||||
| Warm-up time | Approx. 15 minutes | |||||
| Material | Housing: PBT, Front cover: PMMA, Cable: PVC | |||||
| Weight without cable | Approx. 65 g | |||||
Diffuse-reflective type Output based specifications
| Type | Analog current output type | Analog voltage output type | RS-422 type | |
|---|---|---|---|---|
| Model | NPN type | CD33-☐☐NA | CD33-☐☐NV | CD33-☐☐N-422 |
| PNP type | CD33-☐☐PA | CD33-☐☐PV | CD33-☐☐P-422 | |
| Supply voltage | 12 to 24 VDC, ±10/-5% | 18 to 24 VDC, ±10/-5% | 12 to 24 VDC, ±10/-5% | |
| Current consumption | Max. 85 mA (including analog output | Max. 55 mA | ||
| Control output | Output channel No. | 2ch: Q1, Q2 (default setting of self-diagnosis output for Q2) | 1ch: Q2 (default setting of self-diagnosis output) | |
| Output method | NPN/PNP open collector output, Max. 100 mA / 30 VDC, residual voltage 1.8 V | |||
| Analog output/serial interface | 4 to 20 mA, load impedance: 300 Ω or less | 0 to 10 V, output impedance: 100 Ω | RS-422 9.6 k to 256 kbps | |
| Applicable regulations | EMC directive (2004/108/EC) / FDA regulations (21 CFR 1040.10) | |||
| Applicable standards | EN 60947-5-7 | EN 60947-5-2 | ||
<Measurement conditions> The measurement conditions are as follows unless otherwise designated: Ambient temperature of +23℃ (normal temperature), Supply voltage 24 VDC, Response time: High-resolution, Center of measurement range, Measurement target: 50 ☓ 50 mm white ceramic.*1 Defined with center strength 1/e2 (13.5%) at the center of measurement range. There may be leak light other than the specified spot size. The sensor may be affected when there is a highly reflective object in the range of the light axis.*2 The response time is a time in which the sensitivity switching time has been added. The sensitivity switching time fluctuates within a max. range of 4 ms (6 ms for CD33-250N☐) depending on measurement conditions. Also, if the sampling period is long, the response time will also increase proportionately.Ex.: Sampling period 500 µs → 1000 µs: Response time 12.5 ms → Approx. 25 ms*3 If external teaching is selected, setting items can be changed as shown in the table below depending on the input time thereof.
| Setting items | Input time |
|---|---|
| 1st point for span adjustment | 70 to 130 ms |
| 2nd point for span adjustment | 170 to 230 ms |
| 1-point teaching of control output Q1Please input the same time for the 2nd point of 2-point teaching within one minute. | 270 to 330 ms |
| Inverted 1-point teaching of control output Q1 | 370 to 430 ms |
| 1-point teaching of control output Q2Please input the same time for the 2nd point of 2-point teaching within one minute. | 470 to 530 ms |
| Inverted 1-point teaching of control output Q2 | 570 to 630 ms |
| Offset (zero reset) | 670 to 5000 ms |
| Clearing offset | 5000 ms or more |
Specular reflection type
| Model | NPN type | CD33-L30☐N-422 | CD33-L50☐N-422 | CD33-L85☐N-422 |
|---|---|---|---|---|
| PNP type | CD33-L30☐P-422 | CD33-L50☐P-422 | CD33-L85☐P-422 | |
| Measurement target object | Specular object, glass | |||
| Center of measurement range | 26.3 mm | 47.3 mm | 82.9 mm | |
| Measurement range | ±2 mm | ±5 mm | ±10 mm | |
| F.S. (full scale) | 4 mm | 10 mm | 20 mm | |
| Light source | Red semiconductor laser, wavelength: 655 nm, Maximum output: 390 μW | |||
| Laser class | IEC/JIS: CLASS 1 FDA: CLASS II | |||
| Spot size*1 | 0.1 × 0.1 mm | |||
| Linearity | ±0.2% F.S. | |||
| Repeat accuracy | 1 μm | 2.5 μm | 5 μm | |
| Sampling period | 0.5 (default setting), 4-stage switching is possible between 1 ms, 1.5 ms, 2 ms | |||
| Responsetime*2Averaging | Fast | 5 ms or less: Averaging 1 time (1 ms) + sensitivity switching time (Max. 4 ms) | ||
| Standard | 12.5 ms or less: Averaging 16 times (8.5 ms) + sensitivity switching time (Max. 4 ms) | |||
| High-resolution | 36.5 ms or less: Averaging 64 times (32.5 ms) + sensitivity switching time (Max. 4 ms) | |||
| Controloutput | Output channel No. | 1ch: Q2 (default setting of self-diagnosis output) | ||
| Output method | NPN/PNP open collector output, Max. 100 mA / 30 VDC, residual voltage 1.8 V | |||
| Analog output | Not equipped | |||
| Serial interface | RS-422 9.6 k to 256 kbps | |||
| Temperature drift | ±0.08%/°C F.S. | |||
| Indicators | Distance indicator | LED bar display on operation surface (25-step) | ||
| Output indicator | Q2 LED lights up during output (orange) | |||
| Input indicator | MF LED lights up during input (orange) | |||
| MF (multi-function) input | Choose from laser OFF, teaching*3, sample & hold Response time: 3 ms or less | |||
| Supply voltage | 12 to 24 VDC, ±10/-5% | |||
| Current consumption | Max. 55 mA | |||
| Connection type | Cable type: Cable length: 2 m (ø5) Connector type: M12, 8-pin | |||
| Protection circuit | Reverse connection protection, overcurrent protection function | |||
| Degree of protection | IP67 | |||
| Ambient temperature/humidity | -10 to +45°C / 35 to 85% RH (no freezing or condensation) | |||
| Ambient illuminance | Sunlight: 10,000 lx Incandescent lamp: 3,000 lx | |||
| Vibration resistance | 10 to 55 Hz; double amplitude 1.5 mm;2 hours in each of the X, Y, and Z directions | |||
| Shock resistance | Approx. 50 G (500 m/s2),3 times in each of the X, Y, and Z directions | |||
| Applicable regulations | EMC directive (2004/108/EC) / FDA regulations (21 CFR 1040.10) | |||
| Applicable standards | EN 60947-5-2 | |||
| Warm-up time | Approx. 15 minutes | |||
| Material | Housing: PBT, Front cover: PMMA, Cable: PVC | |||
| Weight without cable | Approx. 65 g | |||
The measurement conditions are as follows unless otherwise designated: Ambient temperature of +23℃ (normal temperature), Supply voltage 24 VDC, Response time: Highresolution, Center of measurement range, Measurement target: aluminum deposition mirror.*1 Defined with center strength 1/e2 (13.5%) at the center of measurement range. There may be leak light other than the specified spot size. The sensor may be affected when there is a highly reflective object in the range of the light axis.*2 The response time is a time in which the sensitivity switching time has been added. The sensitivity switching time fluctuates within a max. range of 4 ms depending on measurement conditions. Also, if the sampling period is long, the response time will also increase proportionately.Ex.: Sampling period 500 µs → 1000 µs: Response time 12.5 ms → Approx. 25 ms*3 If external teaching is selected, setting items can be changed as shown in the table below depending on the input time thereof.
| Setting items | Input time |
|---|---|
| 1-point teaching of control output Q2Please input the same time for the 2nd point of 2-pointteaching within one minute. | 470 to 530 ms |
| Inverted 1-point teaching of control output Q2 | 570 to 630 ms |
| Offset (zero reset) | 670 to 5000 ms |
| Clearing offset | 5000 ms or more |
| Type | Measurement range | Repeat accuracy | Analog output/serial interface | Control output | Model (Models in parentheses are connector types) | |
|---|---|---|---|---|---|---|
| NPN type | PNP type | |||||
 |  | 2 μm(4 μm*) | 4 to 20 mA | 2ch | CD33-30NA(CD33-30CNA) | CD33-30PA(CD33-30CPA) |
| 0 to 10 V | CD33-30NV(CD33-30CNV) | CD33-30PV(CD33-30CPV) | ||||
| RS-422 | 1ch | CD33-30N-422(CD33-30CN-422) | CD33-30P-422(CD33-30CP-422) | |||
 | 5 μm(8 μm*) | 4 to 20 mA | 2ch | CD33-50NA(CD33-50CNA) | CD33-50PA(CD33-50CPA) | |
| 0 to 10 V | CD33-50NV(CD33-50CNV) | CD33-50PV(CD33-50CPV) | ||||
| RS-422 | 1ch | CD33-50N-422(CD33-50CN-422) | CD33-50P-422(CD33-50CP-422) | |||
 | 10 μm(15 μm*) | 4 to 20 mA | 2ch | CD33-85NA(CD33-85CNA) | CD33-85PA(CD33-85CPA) | |
| 0 to 10 V | CD33-85NV(CD33-85CNV) | CD33-85PV(CD33-85CPV) | ||||
| RS-422 | 1ch | CD33-85N-422(CD33-85CN-422) | CD33-85P-422(CD33-85CP-422) | |||
 | 30 μm(45 μm*) | 4 to 20 mA | 2ch | CD33-120NA(CD33-120CNA) | CD33-120PA(CD33-120CPA) | |
| 0 to 10 V | CD33-120NV(CD33-120CNV) | CD33-120PV(CD33-120CPV) | ||||
| RS-422 | 1ch | CD33-120N-422(CD33-120CN-422) | CD33-120P-422(CD33-120CP-422) | |||
 | 75 μm(100 μm*) | 4 to 20 mA | 2ch | CD33-250NA(CD33-250CNA) | CD33-250PA(CD33-250CPA) | |
| 0 to 10 V | CD33-250NV(CD33-250CNV) | CD33-250PV(CD33-250CPV) | ||||
| RS-422 | 1ch | CD33-250N-422(CD33-250CN-422) | CD33-250P-422(CD33-250CP-422) | |||
 |  | 1 μm | RS-422 | 1ch | CD33-L30N-422(CD33-L30CN-422) | CD33-L30P-422(CD33-L30CP-422) |
 | 2.5 μm | CD33-L50N-422(CD33-L50CN-422) | CD33-L50P-422(CD33-L50CP-422) | |||
 | 5 μm | CD33-L85N-422(CD33-L85CN-422) | CD33-L85P-422(CD33-L85CP-422) | |||
*The repeat accuracy when response time is set to FAST is shown in parentheses.• For the connector type, please purchase an optional DOL-1208-G05MF connector cable.• When using a UQ1-02 control unit, select the RS-422 communication type.