Cảm biến quang Panasonic CX-400 Ver.2 Compact Photoelectric Sensor
Công ty Tự Động Hóa VIETFA cung cấp tất cả dòng cảm biến quang CX-400 Ver.2 của hãng Panasonic.
+84-964 654 007 
DataSheet
Mô tả
Đối với Sê-ri CX-400, người dùng có nhiều lựa chọn Cảm biến quang điện siêu nhỏ gọn để tùy ý sử dụng. Sê-ri bao gồm ba loại chùm tia, năm loại phản xạ ngược, bốn loại phản xạ khuếch tán và bốn loại lượng giác với triệt tiêu tiền cảnh/hậu cảnh. Với ASIC mới (mạch tích hợp dành riêng cho ứng dụng), các Cảm biến yêu cầu năng lượng ít hơn tới 60% so với trước đây.
- Ba chùm tia, năm loại phản xạ ngược, tám loại phản xạ
- Chế độ BẬT Sáng/BẬT Tối
- Bảo vệ ngắn mạch
- Cấp độ bảo vệ IP67
- Tiêu thụ điện năng ít hơn tới 60%
For the CX-400 Series, the user has a large selection of ultra compact Photoelectric Sensors at his disposal. The Series includes three thru-beam, five retro-reflective, four diffuse reflective and four trigonometric types with foreground/background suppression. With its new ASIC (application specific integrated circuit), the Sensors require up to 60% less energy than before.
Characteristics
- Three Thru-Beam, Five Retro-Reflective, Eight Reflective Types
- Light ON/Dark ON Modes
- Short-Circuit Protected
- IP67 Degree Of Protection
- Up To 60% Less Power Consumption
Specification
<PNP output type>PNP open-collector transistor・Maximum source current: 100 mA・Applied voltage: 30 V DC or less (between output and +V)・Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current)Short-circuit protectionIncorporatedResponse time1 ms or lessOperation indicatorOrange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type)Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type)Power indicatorGreen LED (lights up when the power is ON)(incorporated on the emitter)Sensitivity adjuster-Automatic interferenceprevention functionTwo units of sensors can be mountedclose together with interference preventionfilters. (Sensing range: 5 m 16.404 ft)-ProtectionIP67 (IEC)Ambient temperature-25 to +55 ℃ -13 to +131 ℉(No dew condensation or icing allowed),Storage: -30 to +70 ℃ -22 to +158 ℉Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminanceIncandescent light: 3,000 lx or less at the light-receiving faceEMCEN 60947-5-2Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosureVibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours eachShock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times eachEmitting element (modulated)Red LEDInfrared LEDPeakemissionwavelength680 nm 0.027 mil870 nm 0.034 milMaterial0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m 1.640 ft longCable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft longCable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver)WeightNetEmitter: 20 g approx., Receiver: 20 g approx.Gross50 g approx.
<PNP output type>PNP open-collector transistor・Maximum source current: 100 mA・Applied voltage: 30 V DC or less (between output and +V)・Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current)Short-circuit protectionIncorporatedResponse time1 ms or lessOperation indicatorOrange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type)Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type)Power indicatorGreen LED (lights up when the power is ON)(incorporated on the emitter)Sensitivity adjuster-Automatic interferenceprevention functionIncorporated (Two units of sensors can be mounted close together.)ProtectionIP67 (IEC)Ambient temperature-25 to +55 ℃ -13 to +131 ℉(No dew condensation or icing allowed),Storage: -30 to +70 ℃ -22 to +158 ℉Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminanceIncandescent light: 3,000 lx or less at the light-receiving faceEMCEN 60947-5-2Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosureVibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours eachShock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times eachEmitting element (modulated)Red LEDPeakemissionwavelength680 nm 0.027 milMaterial0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m 1.640 ft longCable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft longCable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver)WeightNet20 g approx.Gross30 g approx.
<PNP output type>PNP open-collector transistor・Maximum source current: 100 mA・Applied voltage: 30 V DC or less (between output and +V)・Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current)Output operationSwitchable either Detection-ON or Detection-OFFShort-circuit protectionIncorporatedResponse time1 ms or lessOperation indicatorOrange LED (lights up when the output is ON)Stability indicatorGreen LED (lights up under stable operating condition)Distance adjuster5-turn mechanical adjusterSensing modeBGS / FGS functions switchable with wiring of sensing mode selection inputAutomatic interferenceprevention function (Note 3)IncorporatedProtectionIP67 (IEC)Ambient temperature-25 to +55 ℃ -13 to +131 ℉(No dew condensation or icing allowed ),Storage: -30 to +70 ℃ -22 to +158 ℉Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminanceIncandescent light: 3,000 lx or less at the light-receiving faceEMCEN 60947-5-2Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosureVibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours eachShock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times eachEmitting elementRed LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)Spot diameterø6.5 mm ø0.256 in approx.(at 50 mm 1.969 in distance)MaterialEnclosure: PBT (Polybutylene terephthalate), Front cover: Polycarbonate, Indicator cover: PolycarbonateCable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft longCable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.WeightNet weight: 55 g approx., Gross weight: 65 g approx.
Standard type
| Type | Thru-beam | |||
|---|---|---|---|---|
| Long sensing range | ||||
| Model No. | NPN output | CX-411 | CX-412 | CX-413 |
| PNP output | CX-411-P | CX-412-P | CX-413-P | |
| CE marking directive compliance | EMC Directive, RoHS Directive | |||
| Sensing range | 10 m32.808 ft | 15 m49.213 ft | 30 m98.425 ft | |
| Sensing object | ø12 mm ø0.472 in or more opaque object (Note 4) | |||
| Hysteresis | - | |||
| Repeatability(perpendicular to sensing axis) | 0.5 mm 0.020 in or less | |||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||
| Current consumption | Emitter:15 mA or lessReceiver:10 mA or less | Emitter:20 mA or lessReceiver:10 mA or less | Emitter:25 mA or lessReceiver:10 mA or less | |
| Output | <NPN output type>NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current)<PNP output type>PNP open-collector transistor・Maximum source current: 100 mA・Applied voltage: 30 V DC or less (between output and +V)・Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current) | |||
| Output operation | Switchable either Light-ON or Dark-ON | |||
| Short-circuit protection | Incorporated | |||
| Response time | 1 ms or less | 2 ms or less | ||
| Operation indicator | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) | |||
| Stability indicator | Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) | |||
| Power indicator | Green LED(lights up when the power is ON)(incorporated on the emitter) | |||
| Sensitivity adjuster | Continuously variable adjuster(incorporated on the receiver for thru-beam type) | |||
| Automatic interferenceprevention function | Two units of sensorscan be mountedclose togetherwith interferenceprevention filters.(Sensing range: 5 m16.404 ft) | - | ||
| Protection | IP67 (IEC) | |||
| Ambient temperature | - 25 to +55 ℃ -13 to +131 ℉(No dew condensation or icing allowed ),Storage: -30 to +70 ℃ -22 to +158 ℉ | |||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | |||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |||
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||
| Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each | |||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | |||
| Emitting element (modulated) | Red LED | Infrared LED | ||
| Peak emission wavelength | 680 nm 0.027 mil | 870 nm 0.034 mil | 850 nm 0.033 mil | |
| Material | Enclosure: PBT (polybutylene terephthalate),Lens: acrylic (CX-48□: polycarbonate),Indicator cover: acrylic (CX-48□: polycarbonate) | |||
| Cable | 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | |||
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver). | |||
| Weight | Net weight | Emitter: 45 g approx., Receiver: 50 g approx. | ||
| Gross weight | 100 g approx. | |||
| Accessory | - | |||
| Type | Retroreflective | |||||
|---|---|---|---|---|---|---|
| With polarizing filters | Long sensing range | For transparent object sensing | ||||
| Model No. | NPN output | CX-491 | CX-493 | CX-481 | CX-483 | CX-482 |
| PNP output | CX-491-P | CX-493-P | CX-481-P | CX-483-P | CX-482-P | |
| CE marking directive compliance | EMC Directive, RoHS Directive | |||||
| Sensing range | 3 m9.843 ft (Note 2) | 5 m16.404 ft (Note 2) | 50 to 500 mm1.969 to 19.685 in (Note 2) | 50 to 1,000mm1.969 to 39.37 in (Note 2) | 0.1 to 2 m0.328 to 6.562 ft (Note 2) | |
| Sensing object | ø50 mmø1.969 in ormore opaque,translucent orspecular object(Note 2, 5) | ø50 mmø1.969 in ormore opaqueor translucentobject(Note 2, 5) | ø50 mm ø1.969 in or more transparent,translucent or opaque object(Note 2, 5) | |||
| Hysteresis | - | |||||
| Repeatability(perpendicular to sensing axis) | 0.5 mm 0.020 in or less | |||||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||||
| Current consumption | 13 mA or less | 10 mA or less | ||||
| Output | <NPN output type>NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current)<PNP output type>PNP open-collector transistor・Maximum source current: 100 mA・Applied voltage: 30 V DC or less (between output and +V)・Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current) | |||||
| Output operation | Switchable either Light-ON or Dark-ON | |||||
| Short-circuit protection | Incorporated | |||||
| Response time | 1 ms or less | |||||
| Operation indicator | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) | |||||
| Stability indicator | Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) | |||||
| Power indicator | - | |||||
| Sensitivity adjuster | Continuously variable adjuster(incorporated on the receiver for thru-beam type) | |||||
| Automatic interferenceprevention function | Incorporated(Two units of sensors can be mounted close together.) | |||||
| Protection | IP67 (IEC) | |||||
| Ambient temperature | - 25 to +55 ℃ -13 to +131 ℉(No dew condensation or icing allowed ),Storage: -30 to +70 ℃ -22 to +158 ℉ | |||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||||
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | |||||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |||||
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||||
| Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each | |||||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | |||||
| Emitting element (modulated) | Red LED | Infrared LED | ||||
| Peak emission wavelength | 680 nm 0.027 mil | 650 nm 0.026 mil | 870 nm 0.034 mil | |||
| Material | Enclosure: PBT (polybutylene terephthalate),Lens: acrylic (CX-48□: polycarbonate),Indicator cover: acrylic (CX-48□: polycarbonate) | |||||
| Cable | 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | |||||
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver). | |||||
| Weight | Net weight | 50 g approx. | ||||
| Gross weight | 80 g approx. | |||||
| Accessory | RF-230 (Reflector): 1 pc. | |||||
| Type | Diffuse reflective | ||||
|---|---|---|---|---|---|
| Narrow-view | |||||
| Model No. | NPN output | CX-424 | CX-421 | CX-422 | CX-423 |
| PNP output | CX-424-P | CX-421-P | CX-422-P | CX-423-P | |
| CE marking directive compliance | EMC Directive, RoHS Directive | ||||
| Sensing range | 100 mm3.937 in(Note 3) | 300 mm11.811 in(Note 3) | 800 mm31.496 in(Note 3) | 70 to 300 mm2.756 to 11.811 in(Note3) | |
| Sensing object | Opaque, translucent ortransparent object (Note 5) | Opaque, translucentor transparentobject (Note 5)(Min. sensing object:ø0.5 mm ø0.020 incopper wire) | |||
| Hysteresis | 15 % or less of operation distance (Note 3) | ||||
| Repeatability(perpendicular to sensing axis) | 1 mm 0.039 in or less | 0.5 mm 0.020 in or less | |||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | ||||
| Current consumption | 13 mA or less | 15 mA or less | |||
| Output | <NPN output type>NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current)<PNP output type>PNP open-collector transistor・Maximum source current: 100 mA・Applied voltage: 30 V DC or less (between output and +V)・Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current) | ||||
| Output operation | Switchable either Light-ON or Dark-ON | ||||
| Short-circuit protection | Incorporated | ||||
| Response time | 1 ms or less | ||||
| Operation indicator | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) | ||||
| Stability indicator | Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) | ||||
| Power indicator | - | ||||
| Sensitivity adjuster | Continuously variable adjuster(incorporated on the receiver for thru-beam type) | ||||
| Automatic interferenceprevention function | Incorporated(Two units of sensors can be mounted close together.) | ||||
| Protection | IP67 (IEC) | ||||
| Ambient temperature | - 25 to +55 ℃ -13 to +131 ℉(No dew condensation or icing allowed ),Storage: -30 to +70 ℃ -22 to +158 ℉ | ||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | ||||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||||
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | ||||
| Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each | ||||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | ||||
| Emitting element (modulated) | Infrared LED | Red LED | |||
| Peak emission wavelength | 860 nm 0.034 mil | 645 nm 0.025 mil | |||
| Material | Enclosure: PBT (polybutylene terephthalate),Lens: acrylic (CX-48□: polycarbonate),Indicator cover: acrylic (CX-48□: polycarbonate) | ||||
| Cable | 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | ||||
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable(thru-beam type: both emitter and receiver). | ||||
| Weight | Net weight | 50 g approx. | |||
| Gross weight | 60 g approx. | ||||
| Accessory | - | ||||
Notes:1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.2) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object.
|
3) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.4) If slit masks (optional) are fitted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected.5) Make sure to confirm detection with an actual sensor before use.
| Type | Adjustable range reflective | |||
|---|---|---|---|---|
| Small spot | ||||
| Model No. | NPN output | CX-441 | CX-444 | CX-442 |
| PNP output | CX-441-P | CX-444-P | CX-442-P | |
| CE marking directive compliance | EMC Directive, RoHS Directive | |||
| Adjustable range (Note 2) | 20 to 50 mm 0.787 to 1.969 in | 20 to 100 mm0.787 to 3.937 in | 40 to 300 mm1.575 to 11.811 in | |
| Sensing range(with white non-glossy paper) | 2 to 50 mm 0.079 to 1.969 in | 15 to 100 mm0.591 to 3.937 in | 20 to 300 mm0.787 to 11.811 in | |
| Hysteresis | 2 % or less of operation distance(with white non-glossy paper) | 5 % or less of operation distance(with white non-glossy paper) | ||
| Repeatability | Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper) | |||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||
| Current consumption | 20 mA or less | |||
| Output | <NPN output type>NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current)<PNP output type>PNP open-collector transistor・Maximum source current: 100 mA・Applied voltage: 30 V DC or less (between output and +V)・Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current) | |||
| Output operation | Switchable either Detection-ON or Detection-OFF | |||
| Short-circuit protection | Incorporated | |||
| Response time | 1 ms or less | |||
| Operation indicator | Orange LED (lights up when the output is ON) | |||
| Stability indicator | Green LED (lights up under stable operating condition) | |||
| Distance adjuster | 5-turn mechanical adjuster | |||
| Sensing mode | BGS / FGS functions switchable with wiring of sensing mode selection input | |||
| Automatic interferenceprevention function (Note 3) | Incorporated | |||
| Protection | IP67 (IEC) | |||
| Ambient temperature | -25 to +55 ℃ -13 to +131 ℉(No dew condensation or icing allowed ),Storage: -30 to +70 ℃ -22 to +158 ℉ | |||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | |||
| EMC | EN 60947-5-2 | |||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |||
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||
| Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | |||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | |||
| Emitting element | Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated) | |||
| Spot diameter | ø2 mm ø0.079 in approx.(at 50 mm 1.969 in distance) | ø9 mm ø0.354 in approx.(at 100 mm 3.937 in distance) | ø15 mm ø0.591 in approx.(at 300 mm 11.811 in distance) | |
| Material | Enclosure: PBT (Polybutylene terephthalate), Front cover: Polycarbonate, Indicator cover: Polycarbonate | |||
| Cable | 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long | |||
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | |||
| Weight | Net weight: 55 g approx., Gross weight: 65 g approx. | |||
Notes:1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object 2 mm 0.079 in [CX-444(-P): 15 mm 0.591 in, CX-442(-P): 20 mm 0.787 in], or more, away.3) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
|
Discontinued products
Basic type
| Type | Thru-beam | ||||
|---|---|---|---|---|---|
| Small spot | Long sensing range | ||||
| Light-ON | Dark-ON | Light-ON | Dark-ON | ||
| Model No. | NPN output | CX-411A-C05 | CX-411B-C05 | CX-412A-C05 | CX-412B-C05 |
| PNP output | CX-411A-P-C05 | CX-411B-P-C05 | CX-412A-P-C05 | CX-412B-P-C05 | |
| CE marking directive compliance | EMC Directive, RoHS Directive | ||||
| Sensing range | 10 m 32.808 ft | 15 m 49.213 ft | |||
| Sensing object | ø12 mm ø0.472 in or more opaque object (Note 3) | ||||
| Hysteresis | - | ||||
| Repeatability(perpendicular tosensing axis) | 0.5 mm 0.020 in or less | ||||
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less | ||||
| Current consumption | Emitter: 15 mA or lessReceiver: 10 mA or less | Emitter: 20 mA or lessReceiver: 10 mA or less | |||
| Output | <NPN output type>NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current) | ||||
| Type | Retroreflective | ||
|---|---|---|---|
| With polarizing filters | |||
| Light-ON | Dark-ON | ||
| Model No. | NPN output | CX-491A-C05-Y | CX-491B-C05-Y |
| PNP output | CX-491A-P-C05-Y | CX-491B-P-C05-Y | |
| CE marking directive compliance | EMC Directive, RoHS Directive | ||
| Sensing range | 3 m 9.843 ft (Note 2) | ||
| Sensing object | ø50 mm ø1.969 in or more transparent,translucent or opaque object (Note 2, 4) | ||
| Hysteresis | - | ||
| Repeatability(perpendicular tosensing axis) | 0.5 mm 0.020 in or less | ||
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less | ||
| Current consumption | 13 mA or less | ||
| Output | <NPN output type>NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current) | ||
Notes:1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 reflector (optional). The sensing range represents the actual sensing range of the sensor. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object.
|
3) If slit masks (optional) are fitted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected.4) Make sure to confirm detection with an actual sensor before use.
Standard type
| Type | Adjustable range reflective | |
|---|---|---|
| Model No. | NPN output | CX-443 |
| PNP output | CX-443-P | |
| CE marking directive compliance | EMC Directive, RoHS Directive | |
| Adjustable range (Note 2) | 20 to 50 mm 0.787 to 1.969 in | |
| Sensing range(with white non-glossy paper) | 2 to 50 mm 0.079 to 1.969 in | |
| Hysteresis | 2 % or less of operation distance(with white non-glossy paper) | |
| Repeatability | Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper) | |
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |
| Current consumption | 20 mA or less | |
| Output | <NPN output type>NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current) | |
Notes:1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object 2 mm 0.079 in, or more, away.3) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
|
Order Code
Thru-beam type
| Type | Appearance | Sensing range | Model No. (Note 1) | Outputoperation | Emittingelement | |
|---|---|---|---|---|---|---|
| NPN output | PNP output | |||||
 | 10 m 32.808 ft | CX-411 | CX-411-P | SwitchableeitherLight-ONorDark-ON | Red LED | |
| Long sensingrange | 15 m 49.213 ft | CX-412 | CX-412-P | InfraredLED | ||
| 30 m 98.425 ft | CX-413 | CX-413-P | ||||
Retroreflective type
| Type | Appearance | Sensing range | Model No. (Note 1) | Outputoperation | Emittingelement | |
|---|---|---|---|---|---|---|
| NPN output | PNP output | |||||
| With polarizingfilters |  | 3 m 9.843 ft(Note 2) | CX-491 | CX-491-P | SwitchableeitherLight-ONorDark-ON | Red LED |
| Long sensingrange | 5 m 16.404 ft(Note 2) | CX-493 | CX-493-P | |||
| For transparentobject sensing | 50 to 500 mm1.969 to 19.685 in(Note 2) | CX-481 | CX-481-P | InfraredLED | ||
| 50 to 1,000mm1.969 to 39.37 in(Note 2) | CX-483 | CX-483-P | ||||
| 0.1 to 2 m0.328 to 6.562 ft(Note 2) | CX-482 | CX-482-P | ||||
Diffuse reflective type
| Type | Appearance | Sensing range | Model No. (Note 1) | Outputoperation | Emittingelement | |
|---|---|---|---|---|---|---|
| NPN output | PNP output | |||||
 | 100 mm 3.937 in | CX-424 | CX-424-P | SwitchableeitherLight-ONorDark-ON | InfraredLED | |
| 300 mm 11.811 in | CX-421 | CX-421-P | ||||
| 800 mm 31.496 in | CX-422 | CX-422-P | ||||
| Narrow-view |  | 70 to 300 mm2.756 to 11.811 in | CX-423 | CX-423-P | Red LED | |
Adjustable range reflective type
| Type | Appearance | Sensing range | Model No. (Note 1) | Outputoperation | Emittingelement | |
|---|---|---|---|---|---|---|
| NPN output | PNP output | |||||
| Small spot |  | 2 to 50 mm 0.079 to 1.969 in | CX-441 | CX-441-P | Switchable eitherDetection-ONorDetection-OFF | Red LED |
| 15 to 100 mm 0.591 to 3.937 in | CX-444 | CX-444-P | ||||
| 20 to 300 mm 0.787 to 11.811 in | CX-442 | CX-442-P | ||||
| NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets. |
Notes:
| 1) | The model No. with "E" shown on the label affixed to the thru-beam type sensor is the emitter, "D" shown on the label is the receiver. |
|---|---|
| 2) | The sensing range of the retroreflective type sensor is specified for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in "A" of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. |
| CX-491□ | CX-493□ | CX-481□ | CX-483□ | CX-482□ | |
|---|---|---|---|---|---|
| A | 0 to 3 m0 to 9.843 ft | 0 to 5 m0 to 16.404 ft | 50 to 500 mm1.969 to 19.685 in | 50 to 1,000 mm1.969 to 39.37 in | 0.1 to 2 m0.328 to 6.562 ft |
| B | 0.1 to 3 m0.328 to 9.843 ft | 0.1 to 5 m0.328 to 16.404 ft | 100 to 500 mm3.937 to 19.685 in | 100 to 1,000 mm3.937 to 39.37 in | 0.8 to 2 m2.625 to 6.562 ft |
5 m 16.4 ft cable length types
5 m 16.404 ft cable length types (standard: 2 m 6.562 ft, basic: 0.5 m 1.640 in) are available.When ordering this type, suffix "-C5" for the 5 m 16.404 ft cable length type to the model No.(Excluding CX-44□ and basic type.)(e.g.)5 m 16.404 ft cable length type of CX-411-P is "CX-411-P-C5"
M8 plug-in connector type, M12 pigtailed type
M8 plug-in connector type and M12 pigtailed type are also available.When ordering this type, suffix "-Z" for the M8 connector type, "-J" for the M12 pigtailed type to the model No.(Please note that M12 pigtailed type is not available for CX-44□. Excluding basic type.)(e.g.)M8 connector type of CX-411-P is "CX-411-P-Z"M12 pigtailed type of CX-411-P is "CX-411-P-J"
・Mating cables (2 cables are required for the thru-beam type)
| Type | Model No. | Cable length | Description | |
|---|---|---|---|---|
| For M8 plug-inconnector type | Straight | CN-24A-C2 | 2 m 6.562 ft | Can be used with all models |
| CN-24A-C5 | 5 m 16.404 ft | |||
| Elbow | CN-24AL-C2 | 2 m 6.562 ft | ||
| CN-24AL-C5 | 5 m 16.404 ft | |||
| For M12 pigtailedtype | 2-core | CN-22-C2 | 2 m 6.562 ft | For thru-beam type emitter(2-core) |
| CN-22-C5 | 5 m 16.404 ft | |||
| 4-core | CN-24-C2 | 2 m 6.562 ft | Can be used with all models | |
| CN-24-C5 | 5 m 16.404 ft |
Mating cables
|
|
|
Package without reflector
NPN output type: CX-491-Y
Table of Model Nos.
Standard type
* Products colored in gray are scheduled to be discontinued.
| Type | Standard type(cable length :2m 6.562 ft) | 0.5 m 1.640 incable length types | 5 m 16.4 ftcable length types | M8 plug-inconnector type | M12pigtailed type | ||
|---|---|---|---|---|---|---|---|
| Thru-beam | NPN output | CX-411 | CX-411-C05 | CX-411-C5 | CX-411-Z | CX-411-J | |
| PNP output | CX-411-P | CX-411-P-C05 | CX-411-P-C5 | CX-411-P-Z | CX-411-P-J | ||
| NPN output | CX-412 | CX-412-C05 | CX-412-C5 | CX-412-Z | CX-412-J | ||
| PNP output | CX-412-P | CX-412-P-C05 | CX-412-P-C5 | CX-412-P-Z | CX-412-P-J | ||
| NPN output | CX-413 | CX-413-C05 | CX-413-C5 | CX-413-Z | CX-413-J | ||
| PNP output | CX-413-P | CX-413-P-C05 | CX-413-P-C5 | CX-413-P-Z | CX-413-P-J | ||
| Retroreflective | NPN output | CX-481 | CX-481-C05 | CX-481-C5 | CX-481-Z | CX-481-J | |
| PNP output | CX-481-P | CX-481-P-C05 | CX-481-P-C5 | CX-481-P-Z | CX-481-P-J | ||
| NPN output | CX-482 | CX-482-C05 | CX-482-C5 | CX-482-Z | CX-482-J | ||
| PNP output | CX-482-P | CX-482-P-C05 | CX-482-P-C5 | CX-482-P-Z | CX-482-P-J | ||
| NPN output | CX-483 | CX-483-C05 | CX-483-C5 | CX-483-Z | CX-483-J | ||
| PNP output | CX-483-P | CX-483-P-C05 | CX-483-P-C5 | CX-483-P-Z | CX-483-P-J | ||
| NPN output | CX-491 | CX-491-C05 | CX-491-C5 | CX-491-Z | CX-491-J | ||
| PNP output | CX-491-P | CX-491-P-C05 | CX-491-P-C5 | CX-491-P-Z | CX-491-P-J | ||
| NPN output | CX-493 | CX-493-C05 | CX-493-C5 | CX-493-Z | CX-493-J | ||
| PNP output | CX-493-P | CX-493-P-C05 | CX-493-P-C5 | CX-493-P-Z | CX-493-P-J | ||
| withoutreflector | NPN output | CX-491-Y | CX-491-C05-Y | CX-491-C5-Y | CX-491-Z-Y | CX-491-J-Y | |
| PNP output | CX-491-P-Y | CX-491-P-C05-Y | CX-491-P-C5-Y | CX-491-P-Z-Y | CX-491-P-J-Y | ||
| NPN output | CX-493-Y | CX-493-C05-Y | CX-493-C5-Y | CX-493-Z-Y | CX-493-J-Y | ||
| PNP output | CX-493-P-Y | CX-493-P-C05-Y | CX-493-P-C5-Y | CX-493-P-Z-Y | CX-493-P-J-Y | ||
| Diffusereflective | NPN output | CX-421 | CX-421-C05 | CX-421-C5 | CX-421-Z | CX-421-J | |
| PNP output | CX-421-P | CX-421-P-C05 | CX-421-P-C5 | CX-421-P-Z | CX-421-P-J | ||
| NPN output | CX-422 | CX-422-C05 | CX-422-C5 | CX-422-Z | CX-422-J | ||
| PNP output | CX-422-P | CX-422-P-C05 | CX-422-P-C5 | CX-422-P-Z | CX-422-P-J | ||
| NPN output | CX-423 | CX-423-C05 | CX-423-C5 | CX-423-Z | CX-423-J | ||
| PNP output | CX-423-P | CX-423-P-C05 | CX-423-P-C5 | CX-423-P-Z | CX-423-P-J | ||
| NPN output | CX-424 | CX-424-C05 | CX-424-C5 | CX-424-Z | CX-424-J | ||
| PNP output | CX-424-P | CX-424-P-C05 | CX-424-P-C5 | CX-424-P-Z | CX-424-P-J | ||
| Adjustablerangereflective | NPN output | CX-441 | - | - | CX-441-Z | - | |
| PNP output | CX-441-P | - | - | CX-441-P-Z | - | ||
| NPN output | CX-442 | - | - | CX-442-Z | - | ||
| PNP output | CX-442-P | - | - | CX-442-P-Z | - | ||
| NPN output | CX-443 | - | - | CX-443-Z | - | ||
| PNP output | CX-443-P | - | - | CX-443-P-Z | - | ||
| NPN output | CX-444 | - | - | CX-444-Z | - | ||
| PNP output | CX-444-P | - | - | CX-444-P-Z | - | ||
Basic type
* Products colored in gray are scheduled to be discontinued.* The basic type is the only standard specification product with a cable length of 0.5 m 1.640 in.
| Type | Basic type(cable length : 0.5m 1.640 in) | |
|---|---|---|
| Thru-beam | NPN output | CX-411A-C05 |
| CX-411B-C05 | ||
| PNP output | CX-411A-P-C05 | |
| CX-411B-P-C05 | ||
| NPN output | CX-412A-C05 | |
| CX-412B-C05 | ||
| PNP output | CX-412A-P-C05 | |
| CX-412B-P-C05 | ||
| Retroreflective | NPN output | CX-491A-C05-Y |
| CX-491B-C05-Y | ||
| PNP output | CX-491A-P-C05-Y | |
| CX-491B-P-C05-Y | ||
Accessory
|
Model List
| CX-411 |
| CX-411A-C05 |
| CX-411A-P-C05 |
| CX-411B-C05 |
| CX-411B-P-C05 |
| CX-411-C05 |
| CX-411-C5 |
| CX-411-J |
| CX-411-P |
| CX-411-P-C05 |
| CX-411-P-C5 |
| CX-411-P-J |
| CX-411-P-Z |
| CX-411-Z |
| CX-412 |
| CX-412A-C05 |
| CX-412A-P-C05 |
| CX-412B-C05 |
| CX-412B-P-C05 |
| CX-412-C05 |
| CX-412-C5 |
| CX-412-J |
| CX-412-P |
| CX-412-P-C05 |
| CX-412-P-C5 |
| CX-412-P-J |
| CX-412-P-Z |
| CX-412-Z |
| CX-413 |
| CX-413-C05 |
| CX-413-C5 |
| CX-413-J |
| CX-413-P |
| CX-413-P-C05 |
| CX-413-P-C5 |
| CX-413-P-J |
| CX-413-P-Z |
| CX-413-Z |
| CX-421 |
| CX-421-C05 |
| CX-421-C5 |
| CX-421-J |
| CX-421-P |
| CX-421-P-C05 |
| CX-421-P-C5 |
| CX-421-P-J |
| CX-421-P-Z |
| CX-421-Z |
| CX-422 |
| CX-422-C05 |
| CX-422-C5 |
| CX-422-J |
| CX-422-P |
| CX-422-P-C05 |
| CX-422-P-C5 |
| CX-422-P-J |
| CX-422-P-Z |
| CX-422-Z |
| CX-423 |
| CX-423-C05 |
| CX-423-C5 |
| CX-423-J |
| CX-423-P |
| CX-423-P-C05 |
| CX-423-P-C5 |
| CX-423-P-J |
| CX-423-P-Z |
| CX-423-Z |
| CX-424 |
| CX-424-C05 |
| CX-424-C5 |
| CX-424-J |
| CX-424-P |
| CX-424-P-C05 |
| CX-424-P-C5 |
| CX-424-P-J |
| CX-424-P-Z |
| CX-424-Z |
| CX-441 |
| CX-441-P |
| CX-441-P-Z |
| CX-441-Z |
| CX-442 |
| CX-442-P |
| CX-442-P-Z |
| CX-442-Z |
| CX-443 |
| CX-443-P |
| CX-443-P-Z |
| CX-443-Z |
| CX-444 |
| CX-444-P |
| CX-444-P-Z |
| CX-444-Z |
| CX-481 |
| CX-481-C05 |
| CX-481-C5 |
| CX-481-J |
| CX-481-P |
| CX-481-P-C05 |
| CX-481-P-C5 |
| CX-481-P-J |
| CX-481-P-Z |
| CX-481-Z |
| CX-482 |
| CX-482-C05 |
| CX-482-C5 |
| CX-482-J |
| CX-482-P |
| CX-482-P-C05 |
| CX-482-P-C5 |
| CX-482-P-J |
| CX-482-P-Z |
| CX-482-Z |
| CX-483 |
| CX-483-C05 |
| CX-483-C5 |
| CX-483-J |
| CX-483-P |
| CX-483-P-C05 |
| CX-483-P-C5 |
| CX-483-P-J |
| CX-483-P-Z |
| CX-483-Z |
| CX-491 |
| CX-491A-C05-Y |
| CX-491A-P-C05-Y |
| CX-491B-C05-Y |
| CX-491B-P-C05-Y |
| CX-491-C05 |
| CX-491-C05-Y |
| CX-491-C5 |
| CX-491-C5-Y |
| CX-491-J |
| CX-491-J-Y |
| CX-491-P |
| CX-491-P-C05 |
| CX-491-P-C05-Y |
| CX-491-P-C5 |
| CX-491-P-C5-Y |
| CX-491-P-J |
| CX-491-P-J-Y |
| CX-491-P-Y |
| CX-491-P-Z |
| CX-491-P-Z-Y |
| CX-491-Y |
| CX-491-Z |
| CX-491-Z-Y |
| CX-493 |
| CX-493-C05 |
| CX-493-C05-Y |
| CX-493-C5 |
| CX-493-C5-Y |
| CX-493-J |
| CX-493-J-Y |
| CX-493-P |
| CX-493-P-C05 |
| CX-493-P-C05-Y |
| CX-493-P-C5 |
| CX-493-P-C5-Y |
| CX-493-P-J |
| CX-493-P-J-Y |
| CX-493-P-Y |
| CX-493-P-Z |
| CX-493-P-Z-Y |
| CX-493-Y |
| CX-493-Z |
| CX-493-Z-Y |
