E2K-X Series Omron Cylindrical Proximity Sensor
Công ty Tự Động Hóa VIETFA cung cấp toàn bộ dòng cảm biến E2K-X của Omron
Liên hệ: 
+84-964 654 007 Danh mục: Cảm biến điện dung Từ khóa: Cảm biến điện dung Omron, cảm biến Omron, Cảm biến tiệm cận, E2K-X Series Omron Maker: Omron
+84-964 654 007 Danh mục: Cảm biến điện dung Từ khóa: Cảm biến điện dung Omron, cảm biến Omron, Cảm biến tiệm cận, E2K-X Series Omron Maker: Omron Mô tả
General-purpose Threaded Capacitive Sensor
- Product lineup with M12, M18, and M30 models.
- Fixed sensing distance requires no sensitivity adjustment.
Specification
| Model | E2K-X4ME[],E2K-X4MF[],E2K-X4MY[] | E2K-X8ME[],E2K-X8MF[],E2K-X8MY[] | E2K-X15ME[],E2K-X15MF[],E2K-X15MY[] | |
|---|---|---|---|---|
| Sensing distance | 4mm ±10% | 8 mm ±10% | 15 mm ±10% | |
| Set distance *1 | 0 to 2.8 mm | 0 to 5.6 mm | 0 to 10 mm | |
| Differential travel | 4% to 20% of sensing distance | |||
| Detectable object | Conductors and dielectrics | |||
| Standard sensing object | Grounded metal plate: 50 × 50 × 1 mm | |||
| Response frequency | E and F Models: 100 Hz, Y Models: 10 Hz | |||
| Power supply voltage *2(operating voltage range) | E and F Models: 12 to 24 VDC (10 to 30 VDC)Y Models: 100 to 220 VAC (90 to 250 VAC) | |||
| Current consumption | E and F Models: 15 mA max. | |||
| Leakage current | Y Models: 2.2 mA max. (Refer to Datasheet.) | |||
| Controloutput | Load current | E and F Models: 200 mA max.*2, Y Models: 10 to 200 mA | ||
| Residualvoltage | E and F Models: 2 V max. (Load current: 200 mA, Cable length: 2 m),Y Models: Refer to Engineering Data on Data Sheet. | |||
| Indicators | E and F Models: Detection indicator (red), Y Models: Operation indicator (red) | |||
| Operation mode(with sensing objectapproaching) | E1, F1, and Y1 Models: NOE2, F2, and Y2 Models: NCRefer to the timing charts under I/O Circuit Diagrams on Data Sheet for details. | |||
| Protection circuits | E and F Models: Reverse polarity protection, Surge suppressor, load short-circuitprotection, output reverse polarity protection, Y Models: Surge suppressor | |||
| Ambient temperaturerange | Operating/Storage: -25 to 70°C(with no icing or condensation) | Operating/Storage: -10 to 55°C(with no icing or condensation) | ||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | |||
| Temperature influence | ±20% max. of sensing distance at 23°C in the operating temperature range | |||
| Voltage influence | E and F Models: ±2% max. of sensing distance at rated voltage at rated voltage ±20%Y Models: ±2% max. of sensing distance at rated voltage at rated voltage ±10% | |||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | |||
| Dielectric strength | E and F Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and caseY Models: 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case | |||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Zdirections | |||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | |||
| Degree of protection | IP66 (IEC), in-house standards: oil-resistant | |||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | |||
| Weight (packed state) | Approx. 65 g | Approx. 145 g | Approx. 205 g | |
| Materials | Case | Heat-resistant ABS | ||
| Sensingsurface | ||||
| Clamping nuts | Polyacetal | |||
| Accessories | Instruction manual | |||
Model List
E2K-X4ME1 2M
| NO | NC |
|---|---|
| E2K-X4ME1 2M | E2K-X4ME2 2M |
| E2K-X4MF1 2M | E2K-X4MF2 2M |
| E2K-X4MY1 2M | E2K-X4MY2 2M |
| E2K-X8ME1 2M | E2K-X8ME2 2M |
| E2K-X8MF1 2M | E2K-X8MF2 2M |
| E2K-X8MY1 2M | E2K-X8MY2 2M |
| E2K-X15ME1 2M | E2K-X15ME2 2M |
| E2K-X15MF1 2M | E2K-X15MF2 2M |
| E2K-X15MY1 2M | E2K-X15MY2 2M |
