Màn hình HMI V9080iCD Hakko Electric Monitouch
Ms. Duyen Truong: 
+84-964 654 007
Mr. Nguyen Viet: +84-79 818 0088
Category: Stock kho Tag: V9080iCD Maker: Fuji Electric
+84-964 654 007 Mr. Nguyen Viet:
+84-79 818 0088 Category: Stock kho Tag: V9080iCD Maker: Fuji Electric
DataSheet Description
| V9080iCD | ||
| Power supply | Rated voltage | DC24V |
| Permissible range of voltage | ±10％ | |
| Permissible momentary power failure | within 1ms | |
| Demand (maximum rating) | 17W or less | |
| Insulation resistance | DC500V 10MΩ or more | |
| Physical environment | Ambient temperature | 0～50℃*1 |
| Ambient humidity | 85%RH or less (without dew condensation)*1 | |
| Operation altitude | 2,000 meters or lower | |
| Atmosphere | Not to be exposed to corrosive gas, or conductive dust | |
| Storage temperature | -10～60℃*1 | |
| Storage temperature | 85%RH or less (without dew condensation)*1 | |
| Overvoltage category | Category II | |
| Pollution degree | Pollution degree 2 | |
| Mechanical operating conditions | Resistance to oscillation | Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm, |
| 9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each) | ||
| Resistance to shock | Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: | |
| 3 directions, three times each (18 times in total) | ||
| Electric operating conditions | Resistance to noise | Noise voltage: 1,500Vp-p, pulse width: 1μs, pulse rise time: 1ns |
| Resistance to static discharge | Complies with IEC61000-4-2, contact: 6kV, air: 8kV | |
| Installation conditions | Grounding | Grounding resistance: Less than 100Ω, FG/SG separation |
| Structure | Front panel:Complies with IP66, Type 4X/13 *2 (when waterproof gasket is installed) | |
| Rear cover:Complies with IP20 | ||
| Form: Single unit, Installation method: Panel mounting | ||
| Cooling system | Natural air cooling | |
| Dimensions W*H*D(mm) | 235.0×180.0×48.9 | |
| Dimensions W*H*D(mm) | 220.5×165.5（+0.5/-0） | |
| Case color | Light gray | |
| (black front housing for black model) | ||
| Material | PC resin | |
| *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure. | ||
| Performance Specifications | ||
| Screen memory (FROM) | 64MB | |
| Backup memory (SRAM) | 800KB | |
| Display | Display device | TFT color LCD |
| Resolution | 640×480 | |
| Display size | 8.4″ | |
| Colors | 16.7 million *3 | |
| Backlight | LED | |
| Backlight life | 70,000 hours | |
| Touch switch | Type | Analog resistance film |
| Function switch | Quantity | 8 |
| External interface | D-Sub 9-pin (CN1) | RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system), |
| Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, | ||
| Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500*4 bps | ||
| Modular 8-pin | RS-232C/ RS-485(2-wire system), Asynchronous type, | |
| (MJ1/ MJ2) | Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, | |
| Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps | ||
| SD card | One card slot provided as standard | |
| Ethernet | 1ch, | |
| Baud rate: 100Mbps, 10Mbps | ||
| Wireless LAN | – | |
| USB | Type A、Type mini-B(Ver.2.0) | |
| Sound output | – | |
| Clock | Backup period | 5 years (Ambient temperature 25°C) |
| Calendar accuracy | Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied) | |
| Standard | CE marking | EN61000-6-2,EN61000-6-4 |
| UL･cUL*5 | UL61010-1、UL61010-2-201 | |
| KC*6 | Compliant | |
| Radio Act | – | |
| Classification Standard | – | |
| *2: Hardware of Ver. b or later. | ||
| *3: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors. | ||
| *4: Only for Siemens MPI (Incompatible with DUR-00). | ||
| *5: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508. | ||
| *6: Black model not certified | ||
